Panasonic CF-72 Series Reference Manual page 8

Touch Pad
(Advanced)
When you want to use an external mouse
When an external mouse or trackball with additional functions (e.g., wheel function)
is connected, a part or all of the additional functions may fail to operate. To use
these additional functions, install the driver or application software of the external
device by following the procedure below. However, once the driver or application
software is installed, touch pad functions (e.g., auto scroll) may not operate even if
the touch pad is enabled (see the procedure for "When you want to re-enable the
touch pad.").
Windows 98
1 In [Control Panel] - [Add/Remove Programs], select [touchpad] from the list, press
[Add/Remove] to delete it, then press [Yes] to confirm the deletion.
2 The display will ask you to restart Windows, press [No].
3 Power off your computer (
external mouse or trackball device to the computer.
4 Turn the power on and run the Setup Utility (
[Touch Pad] to [Disable] and close the Setup Utility.
5 Following the operating instructions for the connected external mouse, install the
necessary driver.
Windows NT
1 In [Control Panel] - [Add/Remove Programs], select [touchpad] from the list, press
[Add/Remove...] to delete it, then press [Yes].
2 Press [OK].
If the message appears to reboot your computer, press [No].
3 Power off your computer (
external mouse or trackball device to the computer.
4 Turn the power on and run the Setup Utility (
[Touch Pad] to [Disable] and close the Setup Utility.
5 Following the operating instructions for the connected external mouse, install the
necessary driver.
Windows 2000
1 In [Control Panel] - [Add/Remove Programs], select [touchpad] from the list, press
[Change/Remove] to delete it, then press [Yes] to confirm the deletion.
2 The display will ask you to restart Windows, press [No].
3 Power off your computer (
external mouse or trackball device to the computer.
4 Turn the power on and run the Setup Utility (
[Touch Pad] to [Disable] and close the Setup Utility.
Log on to Windows by using the keyboard. (Up to step 5, use the keyboard for all
operations. The mouse will not function until the computer restarts. Applications
can be changed with Alt + Tab .)
5 Restart your computer by using the keyboard (
down").
6 Following the operating instructions for the connected external mouse, install the
necessary driver.
"Starting Up/Shutting down") and connect the
page 54). In [Main] menu, set
"Starting Up/Shutting down") and connect the
page 54). In [Main] menu, set
"Starting Up/Shutting down") and connect the
page 54). In [Main] menu, set
"Starting Up/Shutting
8
(To next page)