Removing The Battery Connector Pcb; Removing The Cd-Rom Drive; Removing The Bottom Cabine - Panasonic TOUGHBOOK CF-45 Series Service Manual

eas: |
6.10 Removing the Battery Connector -
PCB. "
)
Battery connector PCB 7
a
|
Bottom cabinet
Figure 20-
1, Remove the screw (L),.
Remove the battery connector PCB.
Screw (L): XTB26+8GFZ
6.11 Removing the CD-ROM Drive.
(L)
CD-ROM drive unit
Figure 2%
1. Remove the screws (L).
Remove the CD-ROM drive unit.
Sorew {L): XTB26+8GFZ
CD-ROM plate (L) {P)
i> Spacer (x2)
CD-ROM drive
CD-ROM connector PCB
CD-ROM plate (R)
Figure. 22 @)
2. Disconnect the CD-ROM FPCs.
Remove the two screws.(P) and two spacers.
Remove the CR-ROM connector PCB:
3. Remove the four screws (J) and CD-ROM plates
(), ().
Screw (J): XYN2+J4FN
(P): XYN2+Jd8
6.12 Removing the Bottom Cabinet.
Rib (x3)
Battery cover
Figure 23
1. Remove the battery.cover from the ribs.
Figure 24
2. Remove the spring and expansion bus cover.
3. Remove the E-ring, HDD cover lock button and HDD
cover lock lever.
6-5