Panasonic CF-72 Series Reference Manual page 16

Standby/Hibernation Functions
Windows 98 Windows 2000
When a USB device is connected, there are cases the standby or hibernation function
will not operate in a normal manner due to the USB device. In addition, a USB device
may have to be removed temporarily and the computer restarted in cases where the
computer is unable to start up properly.
Windows 98
When both [Turn off monitor] (in [Control Panel] - [Power Management] - [Power
Schemes]) and [Screen Saver] (in [Control Panel] - [Display] - [Screen Saver]) are set,
there are cases operations cannot resume in a normal manner from the standby or
hibernation mode.
When the screensaver setting is active, do not enter the standby or hibernation mode
while the [MS-DOS Prompt] is being displayed. There are cases operations cannot
resume in a normal manner.
When the computer resumes from the standby or hibernation mode when MS-DOS is
running, the screen may become completely black. In such cases, press
Alt + Tab .
When inserting one more CardBus type card with one already inserted, after entering
the standby or hibernation mode, the computer may not function properly.
If you are using a PC Card, note that some cards may cease to function if the standby
or hibernation function is used several times. When this occurs, immediately shut
down Windows without using the standby or hibernation function.
When [Hibernation] is not displayed in [Power Switch] of the [Power] menu in the
Setup Utility, the hibernation specific partition is not secured. Reinstall the OS to
secure a partition by using the Product Recovery CD-ROM.
Windows NT
Confirm that Phoenix APM 2.0 for Windows NT
time to be normally displayed with the standby or hibernation function. (If [APM 2.0 for
NT] is displayed in [Control Panel], this means that the program is installed.)
Do not enter the standby or hibernation mode before logging on. The computer will no
longer generate a sound and will not function properly.
Manually set the computer in the standby or hibernation mode when not using the
computer, since there are cases the standby/hibernation timeout may not work prop-
erly.
When [Hibernation] is not displayed in [Power Switch] of the [Power] menu in the
Setup Utility, the hibernation specific partition is not secured. Reinstall the OS to
secure a partition by using the Product Recovery CD-ROM.
® is installed, in order for the date and
16