Panasonic CF-72 Series Reference Manual page 52

Modem
Connecting to a Telephone Line and Settings
Windows 98 Windows 2000
When using the internal modem, set [Modem] to [Enable]* in the Setup Utility. (*
Default)
1
Connecting a telephone line to the internal modem
It is not possible to connect the internal modem to any of the following lines.
Internal home phones
Intercoms
CAUTION
Do not use the PBX internal phone lines installed in company offices. Doing
so may lead to a fire or electric shock.
NOTE
There are cases telephone construction (or installation) work will be neces-
sary depending on the shape of the connector of the telephone line.
2
Install the modem driver
1
Select [Start] - [Run].
2
Type [c:\util\drivers\modem\setup.exe] and press [OK].
3
Select [Next], then select [Next].
4
Select [Finish].
3
Select [Modems] in [Start] - [Settings] - [Control Panel]
4
Select [Dialing Properties]
Input the necessary information (items such as the country, area code, etc.) and
press [OK], then press [Close].
5
Restart the computer
CAUTION
Do not use standby and hibernation functions during communications.
Windows NT
( page 50)
52