Setting Up The Sonichub Speakers - Simrad NSO Operation Manual

Setting up the SonicHub speakers

Speaker zones
Your unit has four on-board amplified channels for directly driving speakers. There are
also two low level channels (stereo) for supplying signal to an external amplifier, plus two
mono channels for amplified subwoofer(s).
The audio outputs are organized in 3 zones. You can adjust balance, volume and volume
limit settings independently for each zone. Adjustments to the bass and treble settings
will alter all zones. Refer graphics below.
Master volume control
You can select which zones that shall be adjusted by the master volume control. When
the audio bar is active, the volume in all selected zones will be altered when you
increase/descrease the volume from the OP40 unit.
92 | Audio
Zone 1 Left/Right speakers
Zone 2 Left/Right speakers
Zone 3 $PSOL¿HU RXWSXW 6XEZRRIHU RXWSXW
MENU WIN