11 Navigating
The navigation function included in the NSO allows you to navigate towards the cursor
position, a position defined by latitude and longitude values, a waypoint or along a
predefined route.
For information about positioning waypoints and creating routes, refer the Waypoints,
Tracks and Routes section.
Navigate to cursor position
PLOT
GO TO
MARK
VESSEL
You can start navigation to cursor position from any panel by moving the cursor to the
position you wish to navigate to and pressing the GOTO key.
The go to cursor option will only be available when the cursor is active on a Chart, Radar
or Echosounder panel.
Navigate a route
You can start navigating a route on a chart panel by moving the cursor over the route
and then pressing the MENU key.
Selecting start point
You can navigate a route starting from any waypoint by positioning the cursor over the
selected waypoint and pressing the MENU key.
Cancel navigation
You cancel navigation by pressing the GOTO key.
PLOT
GO TO
MARK
VESSEL
Navigating | 77