The Autopilot Panel - Simrad NSO Operation Manual

Locking an NSO unit
If several NSO units or AP24/AP28 control units are included
in the system, a non-active NSO unit can be locked to prevent
unauthorised operation of the autopilot.
When the unit is locked this is indicated with a lock symbol and
with text in the pop up.
When the lock function is in use, no automatic modes can be selected from the NSO unit.
The lock function is not available on an NSO unit when controlling the pilot!
If the NSO unit is part of an AP24/AP28 system, the unit can be locked from the AP24/
AP28 control unit. Refer to Locking remote stations at the end of this chapter.

The autopilot panel

The autopilot panel can be used to display information when you are navigating. The
panel can be added to the NAV page groups or to any other pages groups as described in
the Customizing your system section.
'DWD ¿HOGV
The autopilot panel shows destination name, heading and rudder information. The
following abbreviations are used:
CTS
DTD
SOG
COG
DTW:
XTE:
64 | Autopilot operation
Course to steer
Distance to destination
Speed over ground
Course over ground
Distance to next waypoint
Cross track error