Dynamic Range Control settings - DAB
Dynamic Range Control (also known as DRC) can
make quieter sounds easier to hear when your radio
is used in a noisy environment.
1.
Press and release the Band button until the DAB
mode is selected.
2.
Press and hold in the Jog wheel.
3.
Push the Jog wheel up or down until 'DRC Value'
is highlighted on the display. Click the Jog wheel
to enter the DRC settings menu.
4.
Push the Jog wheel up or down to select the
required DRC setting (the default is 0).
DRC 0 - DRC is switched off, Broadcast DRC will
be ignored. DRC 1/2 - DRC level is set to 1/2 that
sent by broadcaster. DRC 1 - DRC level is used
as sent by broadcaster. The current DRC setting
will be marked with an asterisk.
5.
Click the Jog wheel to confi rm the setting. The
display will return to the previous display.
Note: Not all DAB broadcasts are able to use the
DRC function. If the broadcast does not support DRC,
then the DRC setting in the radio will have no effect.
29