1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Motherboard
  5. TKS-G21-CV05
  6. Manual

Aaeon TKS-G21-CV05 Manual

Embedded box intel atom d2700 2.13 ghz \ processor 2 gbe lan, 4 usb2.0, 6 com, 1 vga 1 mini pcie, 1 cfast?
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
E m b e d d e d B o x
T K S - G 2 1 - C V 0 5
TKS-G21-CV05
Fanless Embedded Box
®
Intel
Atom™ D2700 2.13 GHz Processor
2 GbE LAN, 4 USB2.0, 6 COM, 1 VGA
1 Mini PCIe, 1 CFast™
st
TKS-G21-CV05 Manual 1
Ed.
March 2012

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TKS-G21-CV05 and is the answer not in the manual?

Questions and answers

Related Manuals for Aaeon TKS-G21-CV05

Summary of Contents for Aaeon TKS-G21-CV05

  • Page 1 T K S - G 2 1 - C V 0 5 TKS-G21-CV05 Fanless Embedded Box ® Intel Atom™ D2700 2.13 GHz Processor 2 GbE LAN, 4 USB2.0, 6 COM, 1 VGA 1 Mini PCIe, 1 CFast™ TKS-G21-CV05 Manual 1 March 2012...

  • Page 2: Copyright Notice

    AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Acknowledgments All other products’ name or trademarks are properties of their respective owners.  AMI is a trademark of American Megatrends Inc. ...

  • Page 4: Packing List

    Before you begin operating your PC, please make sure that the following materials are enclosed:  TKS-G21-CV05 Embedded Controller  CD-ROM for manual (in PDF format) and drivers If any of these items should be missing or damaged, please contact...
  • Page 5 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3.
  • Page 6 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 The equipment does not work well, or you cannot get it to work according to the user’s manual. The equipment has been dropped and damaged.
  • Page 7 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Boxer/ Industrial System 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬...

  • Page 8: Table Of Contents

    1.1 Introduction..............1-2 1.2 Features ..............1-3 1.3 Specifications ............1-4 Chapter 2 Hardware Installation 2.1 Dimension and I/O of TKS-G21-CV05 ...... 2-2 2.2 Location of Connectors and Jumpers of the Main Board ..................2-3 2.3 List of Jumpers ............2-5 2.4 List of Connectors .............
  • Page 9 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Appendix A Programming The Watchdog Timer A.1 Programming ............A-2 A.2 ITE8783 Watchdog Timer Initial Program....A-6 Appendix B I/O Information B.1 I/O Address Map ............B-2 B.2 1 MB Memory Address Map.........B-4...

  • Page 10: Chapter 1 General Information

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 11: Introduction

    TKS-G21-CV05 offers low power consumption system that while operating in ambient temperatures ranging from 0° to 50°C. The TKS-G21-CV05 is a standalone high performance controller designed for long-life operation and with high reliability. It can replace traditional methods and become the mainstream controller for the multimedia entertainment market.

  • Page 12: Features

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 1.2 Features ®  Intel Atom D2700 2.13 GHz Processor  DDR3 1066 SODIMM x 1, Up To 4 GB ...

  • Page 13: Specifications

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 1.3 Specifications ® Onboard Intel Atom™ D2700 Processor up to 2.13 GHz ® Chipset Intel Atom™ D2700 + NM10 204-pin DDR3 SODIMM x 1, Max.
  • Page 14 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Desktop or Wallmount (optional) Mounting Operating Temperature 32°F ~ 122°F (0°C ~ 50°C) -40°F ~ 176°F (-40°C ~ 80°C) Storage Temperature 0.5g rms/ 5 ~ 500Hz/ random operation (CFast™);...
  • Page 15 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Chapter Quick Installation Guide 2 - 1 Chapter 2 Quick Installation Guide...

  • Page 16: Dimension And I/O Of Tks-G21-Cv05

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 2.1 Dimension and I/O of TKS-G21-CV05 Front side Back side 2 - 2 Chapter 2 Quick Installation Guide...

  • Page 17: Location Of Connectors And Jumpers Of The Main Board

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 2.2 Location of Connectors and Jumpers of the Main Board Component Side 2 - 3 Chapter 2 Quick Installation Guide...

  • Page 18: Solder Side

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Solder Side 2 - 4 Chapter 2 Quick Installation Guide...

  • Page 19: List Of Jumpers

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 2.3 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
  • Page 20 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 CN28 RJ-45 Ethernet CN29 RJ-45 Ethernet CN30 USB Port #1 and #2 CN31 Audio Line In/Out and MIC CN32 CRT/DVI (Configured by manufacturing) CN33...

  • Page 21: Com Port #2 Rs-232/422/485 Selection (Cn19)

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 2.5 COM Port #2 RS-232/422/485 Selection (CN19) COM2 RS-232/422/485 selection for AAEON TKS series is set in BIOS setting as following: ...
  • Page 22 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 TXD+ RXD- N/C / +5 Volt. / (+12 Volt.) Ground RS-485 Mode Signal Signal TXD- TXD+ N/C / +5 Volt. / (+12 Volt.) Ground Note: Issue: COM port limitation for the speed test during the communication.

  • Page 23: Digital I/O Connector (Cn7)

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 2.6 Digital I/O Connector (CN7) Note: The max. rating of Pin 1 ~ Pin 8 is 3.3V@8mA The max.

  • Page 24: Hard Disk Installation

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 2.7 Hard Disk Installation Step 1: Unfasten the screws on the top of the heat-sink and you will see the inside of the system.
  • Page 25 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Step 2: Fasten the four HDD screws and black damper, and then you can put the HDD on the opposite side for screwing it up. 2 - 11 Chapter 2 Quick Installation Guide...
  • Page 26 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Step 3: Putting the HDD with the HDD bracket in by 45 degree height and make sure the bracket holes are matched with the chassis stand. Step 4: Screwing the HDD bracket up and connecting the HDD cables with the MB (GENE-CV05).
  • Page 27 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Step 5: Putting the chassis heat-sink on the top and fastening the screws up. 2 - 13 Chapter 2 Quick Installation Guide...

  • Page 28: Accessory Installation

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 2.8 Accessory Installation Step 1: Unfasten the 5 screws where is on the bottom of the box. Step 2: You can see the inside placement of RAM, CFast™...
  • Page 29 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Step 2-1: Locate the memory module, insert the gold colored contact into the Socket. Push the module down, until it is firmly seated by locking Two latches on the sides.
  • Page 30 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Step 2-3: Insert the Compact-Fast card into the socket until t is firmly seated, and then put the card bracket and screws it up. 2 - 16 Chapter 2 Quick Installation Guide...

  • Page 31: Wallmount Kit Installation

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 2.9 Wallmount Kit Installation Get the brackets ready and fasten appropriate four screws on each bracket. After fastening the two brackets on the bottom lid of, the wall mount kits installation has been finished.

  • Page 32: Chapter 3 Ami Bios Setup

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 33: System Test And Initialization

    3. The CMOS memory has lost power and the configuration information has been erased. The TKS-G21-CV05 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it runs down.

  • Page 34: Ami Bios Setup

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
  • Page 35 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 2. If the "Control LVDS2 (CH7511)" has been set "Enable," and then, the screen can be switched to LVDS2 under the OS. 3.

  • Page 36: Chapter 4 Driver Installation

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Chapter Driver Installation 4 - 1 Chapter 4 Driver Installation...
  • Page 37 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 The TKS-G21-CV05 comes with a CD-ROM that contains all drivers and utilities that meet your needs. Follow the sequence below to install the drivers: Step 1 –...
  • Page 38 T K S - G 2 1 - C V 0 5 4.1 Installation: Insert the TKS-G21-CV05 CD-ROM into the CD-ROM Drive. And install the drivers from Step 1 to Step 6 in order. Step 1 – Install Chipset Driver 1.
  • Page 39 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Step 5 – Install AHCI Driver Please refer to the Appendix C AHCI Setting Step 6 – Install Wireless LAN Driver (Optional) 1.

  • Page 40: Appendix A Programming The Watchdog Timer

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1...

  • Page 41: Programming

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 A.1 Programming TKS-G21-CV05 utilizes ITE 8783 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON initial watchdog timer program is also attached based on which you can develop customized program to fit your application.
  • Page 42 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers; (3) Exit the MB PnP Mode.
  • Page 43 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 WatchDog Timer Configuration Registers Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.
  • Page 44 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Watch Dog Timer 1, 2, 3 Configuration Register (Index=72h, 82h, 92h Default=001s0000b) Watch Dog Timer 1,2,3 Time-Out Value (LSB) Register (Index=73h,83h,93h, Default=38h) Watch Dog Timer 1,2,3 Time-Out Value (MSB) Register (Index=74h,84h,94h Default=00h)

  • Page 45: Ite8783 Watchdog Timer Initial Program

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 A.2 ITE8783 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ;...
  • Page 46 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 call Superio_Set_Reg ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh...
  • Page 47 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 CALL Write_Configuration_Data Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,81h JNE Not_Initial...
  • Page 48 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 OUT DX,AL MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h]...
  • Page 49 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Set_Logic_Device proc near push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h...

  • Page 50: Appendix B I/O Information

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Appendix I/O Information B - 1 Appendix B I/O Information...

  • Page 51: I/O Address Map

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 B.1 I/O Address Map B - 2 Appendix B I/O Information...
  • Page 52 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 B - 3 Appendix B I/O Information...

  • Page 53: St Mb Memory Address Map

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 B.2 1 MB Memory Address Map B - 4 Appendix B I/O Information...

  • Page 54: Irq Mapping Chart

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 B.3 IRQ Mapping Chart B - 5 Appendix B I/O Information...

  • Page 55: Dma Channel Assignments

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 B.4 DMA Channel Assignments B - 6 Appendix B I/O Information...

  • Page 56: Appendix C Ahci Setting

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 A ppendix AHCI Setting Appendix C AHCI Setting...

  • Page 57: Setting Ahci

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 C.1 Setting AHCI OS installation to setup AHCI Mode. Step 1: Copy the files below from “Driver CD -> STEP5-AHCI\WIN7_32\F6 Install Floppy Create for 32 and 64 bit Windows”...
  • Page 58 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Step 3: Setup OS Step 4: Press “F6” Appendix C AHCI Setting...
  • Page 59 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Step 5: Choose “S” tep 6: Choose “Intel(R) NM10 Express Chipset” Appendix C AHCI Setting...
  • Page 60 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Step 7: It will show the model number you select and then press “ENTER Step 8: Setup is loading files Appendix C AHCI Setting...

  • Page 61: Appendix D Digital I/O

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 A ppendix Digital I/O Appendix D Digital I/O D-1...

  • Page 62: D.1 Digital I/O

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 D.1 Digital I/O The F75111 provides one serial access interface, I2C Bus, to read/write internal registers. The address of Serial Bus is 0x6E (0110_1110) The related register for configuring DIO is list as follows: Configuration and Control Register-Index 01h Power-on default [7:0]=0000_1000b...
  • Page 63 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 GPIO2x Output Control Register-Index 20h Power-on default [7:0]=0000_0000b Name Description GPIO 27 output control. Set to 1 GP27_OCT for output function.
  • Page 64 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 GP24_ODA VSB3V GPIO 24 output data. GP23_ODA GPIO 23 output data. VSB3V GP22_ODA VSB3V GPIO 22 output data. GP21_ODA VSB3V GPIO 21 output data.
  • Page 65 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 begin: cl,01h al,80h call CT_I2CWriteByte call Delay5ms mov al,00h cl,20h call CT_I2CWriteByte cl,22h call CT_I2CReadByte ;Input : CL - register index CH - device ID ;Output : AL - Value read Ct_I2CReadByte...
  • Page 66 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 call Delay5ms dx, 0f000h + 04h ; Transmit Slave Address Register ; Set the slave address and al, ch ;...
  • Page 67 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 Ct_I2CReadByte Endp ;Input : CL - register index CH - device ID AL - Value to write ;Output: none Ct_I2CWriteByte Proc Near...

  • Page 68: Port

    E m b e d d e d B o x T K S - G 2 1 - C V 0 5 dx, al dx, 0f000h + 05h al, ah dx, al dx, 0f000h + 00h ; Host Control Register al, 48h ;...
  • Page 69 E m b e d d e d B o x T K S - G 2 1 - C V 0 5 dx,al ;clear status call Delay5ms test al, 02H ;termination of command ? short Clear_final al, NOT 40H ;mask INUSE bit al,al ;status OK ? short Clear_final...

Table of Contents