Ic-A110Euro - Icom IC-A110EURO Service Manual Addendum

1-2 IC-A110EURO SPECIFICATIONS
' ' GENERAL
• Frequency coverage
• Channel spacing
• Type of emission
• No. of memory channels
• Antenna connector
• Power supply requirement : 13.75 V DC or 27.5 V DC
(negative ground)
• Current drain (13.75 V DC) :
Transmit
Receive
• Usable temperature range : –20˚C to +55˚C; –4˚F to +131˚F
• Dimensions
(projections not included)
• Weight
' ' TRANSMITTER
• Output power
(at 13.75 V DC)
• Frequency error
• Modulation depth
• Modulation compression
• Modulation system
• Amplitude mod. distortion
• Input impedance
• Audio frequency rsponse
• Adjacent channel power
• Conducted spuri. emissions : Less than –46 dBm
(Except ±1 kHz of operating
frequency)
• Antenna requirements
: 118.000–136.975 MHz
: 25 kHz/8.33 kHz
: AM (6K00A3E)
: 20 channels
: SO-239 (50 Ω)
5.0 A max
max. audio 4.0 A max
stand-by 500 mA max
: 150(W) × 50(H) × 180(D) mm;
(W) × 1 (H) × 7
5 ⁄ ⁄ ⁄ (D) in.
29 32 31 32 3 32
: 1.5 kg; 3 lb 5 oz.
: 9.0 W ±1.5 dB
(+15˚C to +35˚C; +59˚F to +95˚F)
9.0 W +2 dB or –3 dB
(–20˚C to +55˚C; +68˚F to +131˚F)
: ±1 ppm
(0˚C to +40˚C; +32˚F to +104˚F)
: More than 85 %
: Linear 85 %
Maximum 95 %
: Last stage modulation
: Less than 10 %
: 600 Ω
: +2 dB to –4 dB
(From 350 Hz to 2500 Hz)
More than –25 dB at 5000 Hz
(at 25 kHz channel spacing)
More than –25 dB at 3200 Hz
(at 8.33 kHz channel spacing)
: Less than 60 dB
(at 25 kHz channel spacing)
Less than 50 dB
(at 8.33 kHz channel spacing)
(9 kHz to 30 MHz)
Less than –36 dBm for har-
monics
(30 MHz to 1 GHz)
Less than –46 dBm for non-
harmonics
(30 MHz to 1 GHz)
Less than –30 dBm for har-
monics
(1 GHz to 4 GHz)
Less than –40 dBm for non-
harmonics
(1 GHz to 4 GHz)
: Standard 50 Ω antenna with
a VSWR < 3 : 1
' ' RECEIVER
• Receive system
• Intermediate frequencies
• Sensitivity
• Squelch sensitivity
• Harmonics distortion
• Audio frequency response : +2 dB to –4 dB from 350 Hz
• Audio noise
• Adjacent channel rejection : More than 60 dB
• Surious response rejection : More than 70 dB
• Intermodulation response
• Blocking or desensitisation : More than 70 dB
• Spurious emissions
• Cross modulation rejection : More than 70 dB
• Receiver dynamic range
• Audio output power
(at 13.75 V DC)
Specifications are measured in accordance with EN 300
676.
All stated specifications are subject to change without
notice or obligation.
1 - 2
: Double conversion super-
heterodyne system
: 1st 38.85 MHz
2nd 450 kHz
: Less than 1.8 µV
(at 12 dB SINAD)
: Less than 0.5 µV
(at threshold)
: Less than 5 %
(at 30 % modulation)
Less than 10 %
(at 90 % modulation)
to 3000 Hz
(at 25 kHz ch. spacing)
+2 dB to –4 dB from 350 Hz
to 2500 Hz
(at 8.33 kHz ch. spacing)
: More than 40 dB
: More than 64 dB
: Less than –57 dBm
(9 kHz–1 GHz)
Less than –47 dBm
(1 GHz–4 GHz)
: Less than 6 dB
: • Ext SP.
More than 10.0 W at 10%
distortion with 8 Ω load
• Side tone
More than 100 mW at 10%
distortion with 500 Ω load