Toshiba RAV-SM562BT-E Service Manual/Integration page 131

14-1-3. Under Ceiling Type
RAV-SM562CT-E, RAV-SM802CT-E, RAV-SM1102CT-E, RAV-SM1402CT-E
Be sure to turn off the power supply or circuit breaker before disassembling work
No. Part name

Suction grille 1. Slide the suction grille fixing
2. Under the condition of the suction
‚
Side panel 1. Open the suction grille.
2. After removing the side panel
ƒ
Electrical 1. Remove the suction grille.
parts box
2. Loosen the set screws (2 posi-
3. Remove the electrical parts
4. Remove the set screws
5. Remove the electrical parts box.
In this time, remove connectors of TA
sensor, TC sensor and TCJ sensor if
necessary.
Procedure
knobs (2 positions) toward the
arrow direction of left figure, and
open the suction grille.
grille opened, push the hook
section of hinges (2 positions) at
the rear side, and then pull out
the suction grille.
screws (2 positions), slide the
side panel forward and then
remove it.
tions) of the electrical parts cover.
cover.
(2 positions) of the electrical
parts box.
Hinge
Suction grille
fixing knob
Side panel
Slide forward.
Electrical parts cover
Screws
(Fixing electrical parts cover and box)
Screws
(Fixing electrical parts box and main unit)
– 131 –
Remarks
Pull out suction grille
while pushing hook.
Suction grille
Protector
Level flap
Electrical parts box Electrical par Electr ical parts box
3 -2
3 -3
3 -4
3 -5