Troubleshooting Tools - Dell PowerVault MD3200i Hardware Installation And Troubleshooting Manual

3 In the toolbar, select Mappings Define Additional Mapping. The
Define Additional Mapping window is displayed.
4 Select the appropriate host group from the Host Group or Host field.
5 In Logical Unit Number field, select a LUN. The supported LUNs are 0
through 255.
6 Select the virtual disk to be mapped in the Virtual Disk section. The
Virtual Disk section lists the names and capacity of the virtual disks that
are available for mapping based on the selected host group or selected
host.
7 Click Add.
NOTE:
The Add button is inactive until a host group or host, LUN, and virtual disk
are selected.
8 To define additional mappings, repeat step 4 through step 7.
NOTE:
After a virtual disk has been mapped once, it is no longer available in the
Virtual Disk area.
9 Click Close. The mappings are saved. The Topology pane and the Defined
Mappings pane in the Mappings tab are updated to display the mappings.

Troubleshooting Tools

The Dell PowerVault MDSM establishes communication with each managed
array and determines the current array status. When a problem occurs on a
storage array, the MDSM provides several ways to troubleshoot the problem.
Event Log
You can use the Event Log Viewer to view a detailed list of events that occur
in a storage array. The event log is stored on reserved areas on the storage array
disks. It records configuration events and storage array component failures.
CAUTION:
representative.
The event log stores approximately 8000 events before it replaces an event
with a new event. If you want to keep a record of the events, you may save
them or else clear them from the event log.
The event log window shows the following types of event views:
• Summary view—Shows an event summary in a table form.
54
Preparing Your Systems for Clustering
Use this option only under the guidance of your Technical Support