Light Level Adjustment; Mixed Color Cancel Adjustment - Sony DSC-S70 Service Manual

6. Light Level Adjustment

Adjust the standard LV value.
Mode STILL
Subject Clear chart
(Color reproduction adjustment frame)
Measurement Point Displayed data of page: 1 (Note 2)
Measuring Instrument Adjusting remote commander
Adjustment Page F
Adjustment Address 26, 28
Specified Value AE level: 0FC0 to 1040
Note 1: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Note 2: The right four digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX
 Displayed data
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 5, address: F1, and set data: FF.
3) Select page: D, address: 63, set data: 40, and press the PAUSE
button of the adjusting remote commander.
4) Perform " Data setting during camera system adjustment".
(Refer to page 5-13)
5) Select page: 6, address: 01, set data: 0D, and press the PAUSE
button. (The light level adjustment is performed and the ad-
justment data is stored in page: F, address: 26 and 28)
6) Select page: 6, address: 02, and check that the data is "01".
7) Select page: 0, address: 03, and set data: 06.
8) Select page: 1, and check that the displayed data (Note 2)
satisfies the AE level specified value.
Processing after Completing Adjustments:
1) Select page: 0, address: 03, and set data: 00.
2) Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.
3) Select page: 5, address: F1, and set data: 00.
4) Select page: D, address: 63, set data: 00, and press the PAUSE
button.
5) Release the data setting performed at step 4).
(Refer to page 5-13)
6) Select page: 0, address: 01, and set data: 00.

7. Mixed Color Cancel Adjustment

To perform mixed color cancel adjustment based on data of each
color in color bar.
Mode
Subject
Adjustment Page
Adjustment Address A0 to A3
Note 1: Perform "Light Level Adjustment" before this
adjustment.
Note 2: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 5, address: F1, and set data: FF.
3) Select page: D, address: 63, set data: 40, and press the PAUSE
button of the adjusting remote commander.
4) Perform " Data setting during camera system adjustment".
(Refer to page 5-13)
5) Select page: 6, address: 01, set data: D7, and press the PAUSE
button.
6) Select page: 6, address: 01, set data: D5, and press the PAUSE
button. (The mixed color adjustment is performed and the
adjustment data is stored in page: F, address: A0 to A3)
7) Select page: 6, address: 02, and check that the data is "01".
Processing after Completing Adjustments:
1) Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.
2) Select page: 5, address: F1, and set data: 00.
3) Select page: D, address: 63, set data: 00, and press the PAUSE
button.
4) Release the data setting performed at step 4).
(Refer to page 5-13)
5) Select page: 0, address: 01, and set data: 00.
5-18
STILL
Color bar chart
(Color reproduction adjustment frame)
F