Setting Up The Projector - Sanyo PLC-XU88-WXU30 Owner's Manual

Setting up the projector

Click Setting on the main menu. This function is to set up the projector. Select the sub
menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting.
Item
Screen........................Switches the screen mode. There may not be available
The mark " " indicates the available screen mode in the selected
input source system. The error message appears when the disabled
screen mode indicated with "*" is selected.
Setting up the projector
Description
mode depending on the input mode as shown in the
table below.
Input source
Screen mode Video Computer
Normal
True *
Full *
Zoom
Natural wide
Custom
71