How To Use The Setting Page - Sanyo PLC-XU88-WXU30 Owner's Manual

Chapter 6 Basic setting and operation
Main setting page in the Light Mode display
Returns to the display mode selec-
tion page.
Main menu
The network viewer function in the Light mode has following limitations;
- Cannot select the program or folder for the display.
- Cannot check up the images in the folder or program.

How to use the setting page

To control and set up the projector, use the setting menus on the web browser. The basic operation and
procedures commonly used on this manual are described below.
Example of the Setting Page
The value in the text box indicates current value.
Each item has a valid setting range. The setting value exceeding its range becomes invalid. Some control
items can not be used depending on the selected input mode or functions of the projector you use. In
that case, the values of those items are indicated with "---".
46
Setting page
The blank page appears if your PDA does not provide a Adobe
Flash Player. You need to install the Adobe Flash Player. ( p.45)
The setting pallet appears after clicking the item. Change the
value by clicking or button, or type the number onto the
text box directly and then click Set button.
* Each item has a valid setting range respectively.
Sub menu tab
Page numbers
Returns to main menu
Setting Pallet