Network Configuration - Sanyo PLC-XU88-WXU30 Owner's Manual

Network configuration

Click Network on the main menu. The following setting page is displayed. Set up the
projector's network environment on this Setting sub menu.
Setting of LAN
1. Select a type of LAN from Change setting pull down menu.
LAN1(Wired)
LAN2(Wired)
LAN3(Wired)
LAN4(Wireless)
LAN5(Wireless)
Simple(Wireless)
For the default setting of the above LAN, see the items "Factory Default Setting".
Item
Change setting.......Selects LAN1 to LAN5 and Simple
IP configuration......Sets DHCP or Manual
IP address .................Sets IP address of the projector
Subnet mask............Sets Subnet mask.
...........Sets IP address of the default gateway (Router)
Default gateway* 1
DNS* ..........................Sets IP address of the DNS server.
2
*1 Set [255.255.255.255] if the network does not provide the gateway (router).
*2 Set [255.255.255.255] if you do not use the function E-Mail alert.
Description
Network configuration
51