Sanyo PLC-XU88-WXU30 Owner's Manual page 61

[1]––––––––––––––––––––––––––––––––––
When PJ lamp is off.
When PJ lamp replacement time is reached.
When internal PJ power circuit is failed.
When internal PJ temperature is too high.
[2]––––––––––––––––––––––––––––––––––
When PJ is turned into Standby in proper user
operation.
When lamp Corres. Value reaches
[ ] hours.
When Power management function turns PJ
lamp off.
[3]––––––––––––––––––––––––––––––––––
When the signal is interrupted.
When Auto Play is failed.
When accumulated filter use time
reaches [ ] hours.
Up to 99,999 hours can be set for the time setting.
If condition "When Auto Play is failed" is checked, the trap is sent when the error occurs during the auto dis-
play operation using with the network viewer function ( p.109). For further information of the error, refer to
item "Auto Display setting and control page [3]"(( p.123).
Trap option
Trap option setting
Tick the check boxes in front of the condition item to send the trap.
Set
Click button if you tick or un-tick the check box on a page.
SNMP setting
61