2mp ip vandal dome with fixed-focal lens dante dna1355v (17 pages)
Summary of Contents for Dante DLI1971
Page 1
DLI1971 10X Optical/10X Digital Color Mini PTZ Domes Installation and Operations Manual Model Number: DLI1971 Description: 1/3”, Mini PTZ Dome Day/Night 10X Optical/Digital Zoom...
Precaution 1.Precaution Ø Electrical safety Conform to country and local electrical safety standard when using or installing the product. Using local special power adapter. This dome uses DC12V/1500MA DC power supply. Ø Transportation The dome should be protected against extremes of pressure, vibration and humidity during storage and transportation.
Aluminum, iron and carbon alloy, plastic Material pattern Speed Limitless variable-speedcontrolling 2. 2 Camera parameter Camera Parameters DLI1971 – 10X Color Image Sensor ¼” Sony CCD Resolution Color 500/570BW TVL Effective Pixels NTSC 768(H) x 494(V) / PAL 752(H) x 582(V)
Dome performance 2.3 Dome performance and features This product is high-technology surveillance product with high definition and color camera, variable-speed pan/tilt and multifunction decoder. It can reduce the connection and installation process between systematic parts at a max limit, and also can improve the stability and reliability of the system. Meanwhile it is easy to install and repair, and it has the following advantages: beautiful shape, rotate lightly and neatly, little noise, simple operation and so on.
Function instruction 3.Function in structure This passage mainly describes the main function and general principle of integrated speed dome, and does not refer to the concrete operation methods. Different system platform has different operation methods, generally we should according to the system manuFactory's operation manual. Please contact dealer to get necessary information, under some conditions there are have some particular requirements and operations.
Function Instruction Ø Iris control System defaults Auto Iris. Camera can rapidly adjust size of Iris, through the automaticly induct the changing of environment ray, and thus make the brightness of deferent image stable. “ ” User may adjust Iris by controller keyboard open/close to get required brightness that you need.
System setting 4.System setting 4. 1 Basic operation 4. 1. 1 Current-carring to dome and self-testing The dome conducts self-testing after current-carring,and it rotates slowly until displaying pan origin that is default setting, then moving to tilt origin, the lens will be pulled far to near and near to far, when self-testing is finished, there is relevant system information displaying on the screen, as follow: Dome model Protocol...
System setting 4.2 Edit dome label MAIN MENU SYSTEM SETTING When using a lot of systems of the dome , in order to identify to each dome, COMM SETTING the systems support title setting. The setting ways as follow: FUNCTION SETTING 、...
Page 11
System setting 4.3 Display initial information MAIN MENU 、 95 preset or transfer 9 preset twice in three seconds to enter the 1 Use SYSTEM SETTING COMM SETTING main menu. FUNCTION SETTING EXIT 、 【 】 【 】 2 Tilt up/down joystick to SYSTEM SETTING , press OPEN to enter submenu.
System setting 4.4 Display setup MAIN MENU 、 1 Use 95 preset or transfer 9 preset twice in three seconds to enter the main SYSTEM SETTING menu. COMM SETTING 、 【 】, 【 】 2 Tilt up/down joystick to SYSTEM SETTING press OPEN to enter FUNCTION SETTING submenu.
System setting 4. 5 Systematic motion control MAIN MENU Systematic motion controlling may control a series of SYSTEM SETTING motions of the dome, and plays an important role in controlling COMM SETTING the image of the dome. FUNCTION SETTING EXIT 、...
System setting 4. 5. 3 Park action MOTION This setting allows the dome to run an appointed action after it enters AUTO FLIP vacancy for a few time (1-240minutes). If default sets as 0, it means PROPORTION PAN not to run this action. PARK TIME 、...
System setting 4.6 Clear MAIN MENU 、 1 Use 95 preset or transfer 9 preset twice in three seconds to enter the SYSTEM SETTING main menu. COMM SETTING FUNCTION SETTING 、 【 】 , 2 Tilt up/down joystick to SYSTEM SETTING press EXIT 【...
System setting 5. Index Setup MAIN MENU 5. 1 address of dome setting: SYSTEM SETTING Use 95 preset or transfer 9 preset twice in three seconds to enter COMM SETTING 【 】 the main menu , go to COMM SETTING as the picture, this set FUNCTION SETTING is aim to set the index of operation address and protocol of the dome.
Function setting 6. Function setting MAIN MENU 6. 1 Preset setting SYSTEM SETTING 、 Use 95 preset or transfer 9 preset twice in three seconds to enter the COMM SETTING main menu. according to the order of the left picture, to click each FUNCTION SETTING “...
Function setting 6. 2 Scan MAIN MENU Scan is that pre-set two points , then the camera repeatedly scan SYSTEM SETTING between the two points at a stable speed, the same magnification and COMM SETTING pan . A dome only has one scan tour. 、...
Function setting 6. 3 Pattern MAIN MENU Pattern is built-in function in camera; the speed dome can record SYSTEM SETTING tracks that are no less than 180s. (A series of pan/tilt controlling and COMM SETTING lens controlling command). A dome may set up to 4 pattern tours. FUNCTION SETTING 、...
Function setting 6. 4 Tour MAIN MENU Tour is the built-in function in the speed dome, it will arrange SYSTEM SETTING the presets into the queue of auto-tour, and can set how long it will park COMM SETTING at preset. Operate auto-tour is a process of incessantly transfer each FUNCTION SETTING preset.
Function setting 6. 5 Zone setting MAIN MENU A dome may be set up to 8 zones; the regional scene can't be SYSTEM SETTING 【 overlapped. User will set label for each zone. When setting ZONE COMM SETTING 】 LABEL as ON, the dome will display zone label as it runs some zone.
Installation instruction 7. Installation instruction 7.1 Dimension of product As picture below Picture7.1- 2 3. Insert three screw in the mini dome into the aperture on the base board, then Picture7-1 turn 15 degrees in clockwise. 7.2 Product Installation 1. Get the product from the package Picture7.1- 3 4 Connect the power line, video line and Rs485control-line.
Intallation instruction 、 3 Put one side of connection line which in the 7.3 Intallation instruction accessories through the pinhole on the main rack. 、 1 Dimantle three M3screw from the stator, then take the pan/tilt out. Picture7.3- 3 Picture7.3- 1 、...
Page 24
Installation instruction 、 5 Using 2 M2 screws through the bracket of camera to fix the end of the camera. 、 7 put on decoration cover. Picture7.3- 5 、 6 According to the position in the picture to display the connection line of the camera in the right position and insert the connector.
Appendix 8.Appendix 8.1 Dome menu index MA IN MEN U → SY STEM SE TTING → CO MM SETT ING → FU NCTI ON S ETTI NG EX IT COMM SETTING SYSTEM SETTING FUNCT ION SET TING → → ED I T DO M E LAB EL SI TE ID : PR ESETS →...
Appendix 8.2 Trouble shooting Trouble Possible causes Solution Power supply is damage or Replace power consumption is not enough No action, no video after Power line is bad conne ction Correct power up Engineering line is malfunction Check and repair Refer to switch setting,reset the switch The dome DIP switch setting is incorrect Self-testing and...
Appendix 8.4 Rs485Bus basic knowledge A+ B- Ø Characteristics of Rs485 Bus 120Ω 120Ω As specified by Rs485 standard, Rs485 Bus is of half-duplexed data transmission cables with Pict ure8-4.2 Ω characteristicimpedance as 120 . The maximum load capacity is 32unit loads(including main controller and controller equipment) Ø...
Page 28
Appendix Ø Problems in practical connection In some circumstances user adopts a star In such circumstances the Factory recommends configuration in practical connection. The the usages of Rs485 distributor. The distributor can termination resistors must beconnected to the two change the star configuration connection to the mode equipment 1# and 5# in picture 9-4.4.