Misfeed In The Saddle Stitch Finisher And The Hole Punch Unit (Optional: Mj-1030, Mj-6004); Optional: Mj-1030, Mj - Toshiba e-Studio2500c Operator's Manual

9 BLINKING GRAPHIC SYMBOLS
10
Close the cover of the Bridge Unit.
11
Close the upper tray.
Place both hands at the shaded area of
the upper tray, and then push and close
the upper tray until it locks.
The upper tray can be closed by
pressing the right side of the latch.
Misfeed in the Saddle Stitch Finisher and the Hole Punch Unit

(optional: MJ-1030, MJ-6004)

1
Hold up the guide and remove
any misfed paper in the paper
exit area.
When the Hole Punch Unit (optional: MJ-
6004) is installed, proceed to step 2. If
not installed, proceed to step 6.
342 Jam Symbols