Table of Contents
Advertisement
Video CD playback
GX-CD5200V
ENGLISH
Playback control:
Video CDs that support "Playback control" can display still pictures.
This function can be used with video CD software (video CDs with
playback control) that have a playback method recorded on them.
You can select items you want to watch from the menu displayed on
the TV screen, or you can show still pictures.
Turn on the TV and set the input selector to "VCR".
Auto power off function:
In the stop mode of CD operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
E-17
Downloaded From Disc-Player.com Sharp Manuals
■ Playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the VCD/CD (VCD/CD) button.
3
Open the CD compartment by pushing the area marked
"PUSH OPEN/CLOSE".
4
Place a disc on the spindle, label side up.
Be sure to place 8 cm (3") discs in the middle of the disc trays.
12 cm (5")
5
Close the CD compartment by firmly pushing the right
corner of it.
6
Press the
/
(
/
SELECT/RESUME) button to start
playback.
To stop playback:
Press the
( RETURN) button.
To remove the discs:
In the stop mode, press the PUSH OPEN/CLOSE portion on the CD
door.
Notes:
● Playback control allows a video CD to be played back according
to instructions recorded on the disc. The "previous", "next", "re-
turn" and "select" operations may function differently, depending
on the P.B.C. CDs.
● Some video CDs with playback control may have an "auto pause"
recorded on them. When such a disc is played, the screen will
stop automatically at the point where an "auto pause signal" has
been inserted.
● If the picture looks dirty when a video CD is played back, there
may be a scratch on the video CD. Replace it with another video
CD in good condition.
04/1/28
GX-CD5200V_EN1.fm
8 cm (3")
Advertisement
Table of Contents
Troubleshooting
