Sharp GX-CD5200V Operation Manual page 25

■ To play back the video CD manually
Usually this unit detects the video CD and plays back pictures and
sounds. In case this unit fails to judge it correctly, you can play back
the video CD manually.
1
Press and hold the VCD AUTO/VCD/AUDIO MODE button
for 3 seconds until "VCD ON" appears on the TV screen.
2
Press the
To return to the automatic video CD detection mode:
Press and hold the VCD AUTO/VCD/
AUDIO MODE button for 3 seconds
until "VCD AUTO" appears on the TV
screen.
Notes:
● This setting will be cancelled when you change the discs.
● Whilst in the "VCD ON" state, you cannot play back audio CDs.
● This setting will not work during video CD and MP3 disc playback.
Downloaded From Disc-Player.com Sharp Manuals
<TV screen>
VCD ON
/ ( / SELECT/RESUME) button.
<TV screen>
VCD AUTO
■ Changing the TV screen display
You can check the operation of the main unit by the on-screen dis-
play.
Each time the OSD ON/OFF button is
pressed during playback or in the stop
mode, the display will change as follows:
[During stop mode]
00:00
[During playback]
002/010 01:26
Track Total Elapsed time
number number of
tracks
Note:
The displays may differ depending on the discs.
04/1/28 CX-GD5200V_EN2.fm
GX-CD5200V
ENGLISH
No display
No display
E-24