Table of Contents
Advertisement
Quick Links
DESCRIPTION
Part Number: 1810872
CONNECTION DIAGRAM
Antenna
IR Sensor Input
RS232 Input
or RS485 Input
RS232/RS485 Pin-Out
(Shown Tab-side Down)
UP Button
UNIVERSAL RTS INTERFACE II
Operating Instructions
The addressable Universal RTS Interface II (URTSI II) can be used to communicate
between home automation or other third party systems and SOMFY's RTS Motors and
controls. It is capable of individual or group control, and can be operated via infrared
remote, RS232 and RS485 serial communication. Once an input is activated, an RTS
radio command is sent to the automated window treatment.
Back of Interface control box
Pin 8
Pin 1
Front of Interface control box
STOP Button
DOWN Button
www.AVOutlet.com - Email: Sales@AVOutlet.com - 1-877-271-5398
Power
RS485 Input/Output
Common
Common
To RS232 TX
RS232 RX
Bus Power*
Bus Power*
RS232 TX
To RS232 RX
RS485 B (-)
RS485 A (+)
Program Button
NOTE: Do Not remove antenna.
If a new antenna is needed, it
must be ordered from Somfy to
ensure FCC requirements are
maintained.
*
As an option, power to the URTSI II can be
supplied on leads 4 & 5. In this case, the
plug-in transformer is not needed. In addition,
the power can be daisy-chained to the next
URTSI II over the CAT5 cable. The power
supply should be sized based on the number
of Interfaces on the network segment.
Power/Transmit LED
URTSI Address or
RTS Channel
Rotary Switch
Advertisement
Table of Contents
Related Manuals for SOMFY 1810872
Summary of Contents for SOMFY 1810872
-
Page 1: Operating Instructions
The addressable Universal RTS Interface II (URTSI II) can be used to communicate between home automation or other third party systems and SOMFY’s RTS Motors and controls. It is capable of individual or group control, and can be operated via infrared remote, RS232 and RS485 serial communication. - Page 2 B. INFRARED OPERATION 1. The RTS Interface is compatible with Somfy’s multichannel transmitter. Connect an infrared sensor to the appropriate connector on the back of the Interface. 2. Each individual motor is activated by first aiming the transmitter at the sensor and pressing the desired unit number on the transmitter and then pressing the UP or DOWN buttons.
-
Page 3: Electrical Specifications
6315 Shawson Drive, Unit #1 121 Herrod Boulevard Mississauga, Ontario L5T1J2 Dayton, NJ 08810 SOMFY SYSTEMS, INC. reserves the right to change, SOMFY SYSTEMS, INC. 9/11 Ref. No. 2500872C update or improve this document without prior notice. www.AVOutlet.com - Email: Sales@AVOutlet.com - 1-877-271-5398... -
Page 4: Antenna Power
The addressable Universal RTS Interface II (URTSI II) can be used to communicate between home automation or other third party systems and SOMFY’s RTS Motors and controls. It is capable of individual or group control, and can be operated via infrared remote, RS232 and RS485 serial communication. - Page 5 B. INFRARED OPERATION 1. The RTS Interface is compatible with Somfy’s multichannel transmitter. Connect an infrared sensor to the appropriate connector on the back of the Interface. 2. Each individual motor is activated by first aiming the transmitter at the sensor and pressing the desired unit number on the transmitter and then pressing the UP or DOWN buttons.
Need help?
Do you have a question about the 1810872 and is the answer not in the manual?
Questions and answers