Technical Data; Features And Benefits - Carrier 59TP6A Product Data

CASING
DIMENSIONS
SAP ORDERING
NO.
H
59TP6A040E141110 35 29.5
59TP6A040E171112 35 29.5
59TP6A060E141112 35 29.5
59TP6A060E171114 35 29.5
59TP6A080E171116 35 29.5
59TP6A080E211120 35 29.5
59TP6A100E211120 35 29.5
59TP6A120E241122 35 29.5
{Capacity in accordance with DOE test procedures. Ratings are position dependent. See rating plate.
Minimum heat CFM when low---heat rise adjustment switch (SW 1 ---3) and comfort/efficiency adjustment switch (SW1 ---4) on control center are OFF.
‡
ESP --- External Static Pressure
Comfort Heat TechnologyR — This feature with Adaptive
Control is a proprietary function that promotes homeowner
comfort through two stages of heating. This Carrier furnace offers a
patented algorithm that continually monitors and adjusts furnace
operation by looking at both current and past conditions to
determine the most effective stage of heating and the amount of
time to run each stage, every cycle.
SmartEvapt Technology — When paired with a compatible
thermostat, this dehumidification feature overrides the cooling
blower off-delay when there is a call for dehumidification. By
deactivating the blower off-delay, SmartEvap technology prevents
condensate that remains on the coil after a dehumidification cycle
from re-humidifying throughout the home. This results in reduced
humidity and a more comfortable indoor environment for the
homeowner.
Unlike competitive systems, SmartEvap technology only overrides
the cooling blower off delay when humidity control is needed.
Once humidity is back in control, SmartEvap re-enables the
energy-saving cooling blower off-delay.
ComfortFant Technology — Sometimes the constant fan setting
on a standard furnace system can actually reduce homeowner
comfort by providing too much or too little air! Fan On Plus
technology improves comfort all year long by allowing the
homeowner to select the continuous fan speed of their choice using
a compatible thermostat.
HYBRID HEATR Dual Fuel system — This system can provide
more control over your monthly energy bills by automatically
selecting the most economical method of heating. With HYBRID
HEAT, our system automatically switches between the gas furnace
and the electric heat pump as outside temperatures change to
maintain greater efficiency and comfort than with any traditional
single-source heating system. The heat pump also delivers
high-efficiency cooling in the summer.
Power Heatt Igniter — Carrier's unique SiN igniter is not only
physically robust but it is also electrically robust. It is capable of
running at line voltage and does not require complex voltage
regulators as do other brands. This unique feature further enhances
the gas furnace reliability and continues Carrier's tradition of
technology leadership and innovation in providing a reliable and
durable product.
Full-Featured, Variable Speed Motors — Our variable- -speed
ECM (Electronically Commutated Motor) optimizes comfort levels
in the home year round; features such as passive/active
dehumidification, ramping profiles, and quiet operation. They can
provide cooling match enhancements to increase the effective
SEER of select Carrier air conditioner or heat pump system. This
motor does not report back RPM and static pressure to enable static
pressure reporting to the UI or zoning system, which is required for
zoning, active filter monitoring and system static pressure
reporting.
RATED HEATING OUTPUT†
(BTUH)
(IN.)
D W High Low
14.2 39,000 25,000
17.5 39,000 25,000
14.2 58,000 38,000
17.5 58,000 38,000
17.5 78,000 50,000
21.0 78,000 51,000
21.0 97,000 63,000
24.0 117,000 76,000

FEATURES AND BENEFITS

HEATING AIRFLOW
CFM‡ (High CFM (Low
AFUE
Heating Heating)
96.5% 815 660
96.0% 860 660
95.0% 1120 910
96.3% 1135 860
96.2% 1505 1160
96.5% 1555 1200
96.1% 1865 1435
96.5% 2375 1675
Reliable Heat Exchanger Design — The aluminized steel, clam
shell primary heat exchanger was re- -engineered to achieve greater
efficiency out of a smaller size. The first two passes of the heat
exchanger are based on the current 80% product, a design with
more than ten years of field-proven performance and success.
These innovations, paired with the continuation of a crimped,
no-weld seam create an efficient, robust design for this essential
component.
The condensing heat exchanger, a stainless steel fin and tube
design, is positioned in the furnace to extract additional heat.
Stainless steel coupling box componentry between heat exchangers
has exceptional corrosion resistance in both natural gas and
propane applications.
Optional Media Filter Cabinet — Enhanced indoor air quality in
the home is made easier with our media filter cabinet When
installed as a part of the system, this cabinet allows for easy and
convenient addition of a Carrier high efficiency air filter.
4-Way Multipoise Design — One model for all applications –
there is no need to stock special downflow or horizontal models
when one unit will do it all. The new heat exchanger design allows
these units to achieve the certified AFUE in all positions.
Direct or Single-pipe Venting, or Optional Ventilated
Combustion Air — This furnace can be installed as a 2-pipe
(Direct Vent) furnace, in an optional ventilated combustion air
application, or in single-pipe, non-direct vent applications. This
provides added flexibility to meet diverse installation needs.
Sealed Combustion System — This furnace brings in combustion
air from outside the furnace, which results in especially quiet
operation. By sealing the entire combustion vestibule, the entire
furnace can be made quieter, not just the burners.
Insulated Casing — Foil-faced insulation in heat exchanger
section of the casing minimizes heat loss. The acoustical insulation
in the blower compartment reduces air and motor noise for quiet
operation.
Monoport Burners — The burners are specially designed and
finely tuned for smooth, quiet combustion and economical
operation.
Bottom Closure — Factory- -installed for side return; easily
removable for bottom return. The multi-use bottom closure can
also serve for roll-out protection in horizontal applications, and act
as the bottom closure for the optional return air base accessory.
Certifications — This furnace is CSA (AGA and CGA) design
certified for use with natural and propane gases. The furnace is
factory- -shipped for use with natural gas. A CSA listed gas
conversion kit is required to convert furnace for use with propane
gas. The efficiency is AHRI efficiency rating certified. This furnace
meets California Air Quality Management District emission
requirements.
2
COOLING MOTOR HP -
CFM @ 0.5 SPEED
ESP (VARIABLE
High Heating
(in. W.C.) SPEED)
ESP
(in. W.C.)
0.10 905
0.10 1065
0.12 1065
0.12 1475
0.15 1610
0.15 2005
0.20 2005
0.20 2115
1/2
1/2
1/2
3/4
3/4
1
1
1