5.
Follow the procedures in
Removing the Input/Output (I/O) Board
1.
Follow the procedures in
2.
Remove:
a) battery
b) base cover
c) hard drive
d) optical drive
e) bluetooth card
f) keyboard trim
g) keyboard
h) display assembly
i)
palmrest
j)
media board (available in E6430/E6430 ATG only)
k) ExpressCard cage
l)
system board
3.
Remove the screw that secures the I/O board to the computer.
4.
Remove the I/O board from the computer.
Installing the Input Output (I/O) Board
1.
Place the I/O board in its compartment.
2.
Tighten the screws to secure the I/O board.
3.
Install:
a) system board
b) ExpressCard cage
34
After Working Inside Your Computer .
Before Working Inside Your Computer .