Controlling The Rest Of Your System; Setting The Remote To Control Other; Components; Selecting Preset Codes Directly - Pioneer VSX-D714 Operating Instructions Manual

Controlling the rest of your system

Chapter 10:
Controlling the rest of your
system
Setting the remote to control
other components
There are several ways to set your remote to
control the other components in your system.
The easiest way to do this is to assign the
component's manufacturer preset code
(starting on page 66) to one of the MULTI
CONTROL buttons on the remote control.
The buttons can be set to control the following

components:

Controllable Components
Button
DVD or LD player
DVD/LD:
TV/SAT: TV or Satellite tuner
VCR/DVR: VCR or Digital Video Recorder
CD: CD player
CD Recorder, Tape deck
CD-R/TAPE:
or MD player
TV CONT: TV or Cable TV tuner
TUNER: FM/AM tuner
If you can't find a preset code that matches
the component you want to control, you can
still teach the remote individual commands
from another remote control (page 60).
• The remote control will exit an operation
after 1 minute of inactivity.
Selecting preset codes
directly
MULTI CONTROL
DVD/LD TV / SAT
C D CD-R/TAPE
MASTER
VOLUME
TUNE
ST
ENTER
TUNE
1 While pressing the RECEIVER button,
press and hold the 1 button.
The LED blinks.
2 Press the MULTI CONTROL button for
the component you want to control.
The LED lights.
VCR/DVR TV CONT
TUNER
RECEIVER
ST
10
59
En