Surround Back Speaker Setting; Subwoofer Setting - Pioneer VSX-D714 Operating Instructions Manual

Setting up the receiver
• Cycle through the available choices
using or and choose a configuration
that matches your speaker setup.
One of the following configurations should
match your setup:
FS-CS-SS
FL-C -S
FL-C -SS
FL-C -SL
FL-CS-S
FL-CS-SS
FL-CS-SL

Surround back speaker setting

• Default setting: S (VSX-D814),
D714)
You must let the receiver know if surround
back speaker(s) have been connected, and
how big they are. The size you choose (large or
small) determines how much bass is sent
from the receiver to the speakers. If you have
connected a subwoofer to the surround back
terminals (VSX-D814 only), you should select
the surround back subwoofer setting (SB SW)
from the options. Choose
speaker is connected.
FS-CS-S
FS-C -SS
FS-C -S
FL-CL-SL
FL-CL-SS
FL-CL-S
(VSX-
(asterisk) if no
• Use or to select SB S, SB , SB SW
or SB L.
SB S
SB L
* VSX-D814 only
• To select SB L, you must have SL selected
in the Speaker setting.

Subwoofer setting

You can choose whether the subwoofer is
used or not. Use the plus (PLUS) setting for
extra bass.
• Use or to select subwoofer YES,
PLUS or NO.
• YES – The LFE channel and bass frequen-
cies from the small (S) speakers are sent
to the subwoofer.
• PLUS – The LFE channel and bass
frequencies from all speakers are sent to
the subwoofer (L speakers will also output
bass).
• NO – No bass frequencies are sent to the
subwoofer.
• If you chose the small front speaker
setting, SW YES is automatically set and
locked.
SB
SB SW*
07
43
En