Quick Surround Sound Setup; Automatically Calibrating Your Listening - Pioneer VSX-D714 Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-D714:
Table of Contents

Advertisement

Available languages

Available languages

Quick surround sound setup

Chapter 3:
Quick surround sound setup
VSX-D814 only
Automatically calibrating
your listening area (MCACC)
The Multichannel Acoustic Calibration
(MCACC) system measures the acoustic
characteristics of your listening area, taking
into account ambient noise, speaker size and
distance, and tests for both channel delay and
channel level. After you have set up the
microphone provided with your system, the
receiver uses the information from a series of
test tones to optimize the speaker settings
and equalization for your particular room.
ENTER
MCACC
SETUP
• These test tones can be loud, so take care
that there is no one in the room who will
be startled by the noise.
• Make sure the mic and speakers are not
moved during the MCACC setup.
RECEIVER
1
Connect the microphone to the
MCACC SETUP MIC jack on the front panel.
ADVANCED
STEREO/
SIGNAL
MIDNIGHT/
TUNING
STATION
STANDARD
SURROUND
DIRECT
SELECT
LOUDNESS
LISTENING MODE
MCACC
SETUP MIC
DIGITAL IN
PTY
EON
TUNER EDIT
CLASS
BAND
MPX
SEARCH
MODE
MULTI JOG
2
Place the microphone at your normal
listening position.
Place the mic about ear level at your normal
listening position using the supplied micro-
phone stand on a table or chair.
Make sure there are no obstacles between the
speakers and the microphone.
3
If the receiver is off, press
STANDBY/ON to turn the power on.
4
If you have a subwoofer, turn it on.
5
Press RECEIVER.
6
Press MCACC SETUP.
Try to be as quiet as possible after pressing
MCACC SETUP. The system outputs a series
of test tones to establish the ambient noise
level.
If the noise level is too high, NOISY! blinks in
the display for five seconds. To exit and check
the noise levels again, press MCACC SETUP
(see the notes regarding ambient noise levels
below) or press ENTER when you're prompted
to GO NEXT?
The system now checks the microphone and
your speaker setup.
If you see an ERR message in the display,
there may be a problem with your mic or the
speaker connections.
SB CH
MULTI JOG
SPEAKERS
MODE
TONE
QUICK SETUP
VIDEO INPUT
S-VIDEO
VIDEO
L AUDIO R
03
13
En

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Vsx-d814

Table of Contents