Searching For Rds Programs; An Introduction To Eon - Pioneer VSX-D714 Operating Instructions Manual

08 Using the tuner
• If you see NO RADIO TEXT DATA in the
RT display, it means no RT data is
transmitted from the broadcast station. If
you have entered a name for the station, it
is broadcast instead of RT data. If you
haven't, the display will automatically
switch to the PS data display. If no PS
data is transmitted from the station, the
frequency will be displayed.
• In the PTY display, there are cases where
NO DATA is shown. If this happens, the
PS display is shown after a few seconds.
• This unit converts lower case characters
transmitted by broadcast stations to
upper case characters.
• If reception conditions are strong but the
RDS data is displayed incorrectly, press
RF ATT.

Searching for RDS programs

One of the most useful features of RDS is the
ability to search for a particular kind of radio
program. You can search for any of the
program types listed on the previous page.
STATION
TUNER EDIT CLASS
MULTI JOG
/ SIGNAL MIDNIGHT/
SELECT LOUDNESS SPEAKERS
VIDEO INPUT
MCACC
SETUP MIC DIGITAL IN S-VIDEO
56
En
ADVANCED STEREO/ SIGNAL
TUNING
STANDARD SURROUND DIRECT SELECT
LISTENING MODE
SETUP MIC
PTY EON
BAND MPX SEARCH MODE
ENTER
MASTER VOLUME
MULTI JOG
SB CH
TONE
MODE QUICK SETUP
DOWN
VIDEO L AUDIO R
1 Press the BAND button to select the
FM band.
RDS is only possible in the FM band.
2 Press the PTY SEARCH button.
SEARCH shows in the display.
3 Use the MULTI JOG dial to select the
program type you want to hear.
4 Press ENTER to search for the program
type.
The system starts searching through the
station presets for a match. When it finds one,
the search stops and the station plays for five
seconds.
5 If you want to keep listening to the
station, press ENTER within the 5 seconds.
If you don't press ENTER, searching resumes.
If NO PTY is displayed it means the tuner
couldn't find that program type at the time of
the search.
• RDS searches station presets only. If no
stations have been preset, or if the
program type could not be found among
MIDNIGHT/
LOUDNESS
the station presets NO PTY is displayed.
FINISH means the search is complete.
DIGITAL IN

An introduction to EON

When EON (Enhanced Other Network
information) is turned on, the receiver jumps
to an EON-linked broadcast when it begins,
MULTI JOG
even if a receiver function other than the tuner
is being used. It can't be used in areas that
EON information isn't transmitted and when
FM broadcast stations don't transmit PTY
UP
data. When the broadcast ends, the tuner
returns to the original frequency or function.