Choosing The Input Signal - Pioneer VSX-D714 Operating Instructions Manual

06 Listening to your system
• While listening to a source, press
STEREO/DIRECT for stereo playback.
Press repeatedly to switch between:
• STEREO – The audio is heard with your
surround settings and you can still use
the Midnight, Loudness, and Tone control
functions.
• DIRECT – Bypass all effects and surround
settings so that the audio remains as
close to the source audio signal as
possible.
• If you switch on Midnight listening, Loud-
ness, or the Tone controls when DIRECT is
selected, the receiver automatically
switches to STEREO.

Choosing the input signal

• Default setting: AUTO
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
ADVANCED STEREO/
STANDARD SURROUND DIRECT
LISTENING MODE
PTY EON
SEARCH MODE
• Press SIGNAL SELECT on the front
panel to select the input signal corre-
sponding to the source component.
Each press cycles through the options as
follows:
• AUTO – This automatically switches to
DIGITAL if a digital source is detected,
otherwise it remains on ANALOG.
• DVD 5.1ch – Selects the multichannel
inputs (only appears when DVD/LD is
selected).
36
En
MULTI JOG
SIGNAL MIDNIGHT/ SB CH
TONE
SELECT LOUDNESS SPEAKERS MODE QUICK SETUP
VIDEO INPUT
MCACC
SETUP MIC DIGITAL IN S-VIDEO VIDEO L AUDIO R
• ANALOG – Selects the analog inputs.
• DIGITAL – Selects the digital input.
When set to DIGITAL or AUTO, 2 DIGITAL
lights when a Dolby Digital signal is input,
and DTS lights when a DTS signal is input.
• This receiver can only play back Dolby
Digital, PCM (32kHz–96 kHz) and DTS
digital signal formats (however, only the
VSX-D814 can decode DTS 96kHz/24 bit
signal formats). With other digital signal
formats, set to ANALOG.
• You may get digital noise when a LD or CD
player compatible with DTS is playing an
analog signal. To prevent noise, make the
proper digital connections (page 16) and
set the signal input to DIGITAL.
• Some DVD players don't output DTS
signals. For more details, refer to the
instruction manual supplied with your
DVD player.