The correct power tool will 6) If operating a power tool in a damp do the job better and safer at the rate for location is unavoidable, use a residual Jigsaw WX473 WX473.1 WX474...
Page 3
15. Only withdraw the blade from the cut to avoid a safety hazard. when the blade has been stopped moving. 16. The pivoting blade foot must be held firmly against the material being cut to reduce Jigsaw WX473 WX473.1 WX474...
1. The laser shall be used and maintained in accordance with the manufacturer’s instructions. 2. Never aim the beam at any person or an object other than the work piece. 3. The laser beam shall not be deliberately aimed at another person Jigsaw WX473 WX473.1 WX474...
Page 5
SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Double insulation Wear eye protection Wear ear protection Wear dust mask Rcm approval mark Laser radiation Do not stare into beam Jigsaw WX473 WX473.1 WX474...
Page 7
15. PROTECTION FINGER 16. TOOL-FREE BLADE HOLDER 17. DUST COVER 18. PENDULUM ACTION CONTROL 19. LASER (Only for WX474) 20. LASER ON-OFF SWITCH (Only for WX474) Not all the accessories illustrated or described are included in standard delivery. Jigsaw WX473 WX473.1 WX474...
Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Jigsaw WX473 WX473.1 WX474...
(11) rotate the ring clockwise (Jigsaw upside down) and hold in position (See E). Then fully insert the blade into the blade holder slot with blade teeth facing forward and release the ring, Jigsaw WX473 WX473.1 WX474...
11. BASE PLATE PROTECTION Your tool is equipped with base plate protection that protects finer surface. To attached, hook the protection over front of base plate and snap into place at the rear of base plate. Jigsaw WX473 WX473.1 WX474...
Page 11
The saw blade can be directed to follow the line in order to align the cut with the line. Either straight cutting or bevel cutting, it will make more precise movement during cutting. Jigsaw WX473 WX473.1 WX474...
Page 12
Both wood and sheet metal must be cut. Do not force the cutting blade when cutting thin metal or sheet steel, as they are harder materials and will take longer to cut. Jigsaw WX473 WX473.1 WX474...
This is normal and will not damage your power tool. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Jigsaw WX473 WX473.1 WX474...
Need help?
Do you have a question about the WX473 and is the answer not in the manual?
Questions and answers