Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Worx WX422
Summary of Contents for Worx WX422
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Electric Circular Saw WX422...
- Page 7 13. SAW BLADE (See Fig. A) 14. BLADE BOLT (See Fig. A) 15. PARALLEL GUIDE 16. PARALLEL GUIDE CLAMPING FIXTURE 17. OUTER FLANGE (See Fig. A) Not all the accessories illustrated or described are included in standard delivery. Electric Circular Saw WX422...
-
Page 8: Technical Data
TECHNICAL DATA Type WX422 (4 - designation of machinery, representative of Saw) Voltage 230–240V~50Hz Rated power 350W No load (rated) speed 3600/min Blade size TCT blade 85 mm X 1.2 mm X 15 mm X 24T HSS blade 85 mm X 1.2 mm X 15 mm X 44T 85 mm X 1.2 mm X 15 mm X 60G... -
Page 9: Noise Information
If the tool is to be used regularly then invest in anti vibration accessories. Avoid using tools in temperatures of 10°C or less. Plan your work schedule to spread any high vibration tool use across a number of days. Electric Circular Saw WX422... -
Page 10: General Power Tool Safety Warnings
When operating a power tool connected and properly used. Use of dust outdoors, use an extension cord collection can reduce dust-related hazards. suitable for outdoor use. Use of a cord Electric Circular Saw WX422... -
Page 11: Further Safety Instructions For All Saws
SAWS identical replacement parts. This will ensure that the safety of the power tool is Kickback causes and related warnings maintained. - Kickback is a sudden reaction to a pinched, Electric Circular Saw WX422... -
Page 12: Safety Instructions For Saws With Inner Pendulum Guard
Unsharpened or improperly set blades in its path. Be aware of the time it takes for produce narrow kerf causing excessive the blade to stop after switch is released. Electric Circular Saw WX422... -
Page 13: Circular Saw
I) Hold the power tool by insulated f) Do not use worn down reinforced gripping surfaces only, when wheels from larger power tools. Electric Circular Saw WX422... - Page 14 Abrasive h) Do not restart the cutting operation wheels may also break under these conditions. Electric Circular Saw WX422...
-
Page 15: Additional Safety Rules
Use extra caution when making a “pocket cut” into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback. ADDITIONAL SAFETY RULES: 1. Always wear a dust mask. Electric Circular Saw WX422... - Page 16 Check with your local authorities or retailer for recycling advice. Diamond disc Before any work on the machine itself, pull the mains plug from the socket outlet. HSS blade Wear protective gloves TCT blade Wood Aluminium Electric Circular Saw WX422...
-
Page 17: Maintain Tools With Care
Choice of blades: 24 teeth for general work, approx. 40 teeth for finer cuts, more than 40 teeth for very fine cuts into delicate surfaces, diamond for tile, cement board, etc. Only use saw blades recommended. Electric Circular Saw WX422... -
Page 18: Troubleshooting
Saw is not being guided mounted. properly. Use a parallel guide. Allow the saw blade to reach full Blade kicks back when Blade is not spinning fast speed prior to beginning a cut in the beginning a cut enough material. Electric Circular Saw WX422... -
Page 19: Declaration Of Conformity
Declare that the product, BLUE =NEUTRAL Description WORX Electric Circular Saw Brown = Live Type WX422 (4-designation of machinery, As the colors of the wires in the mains lead of representative of Saw) this appliance may not correspond with the... - Page 20 Copyright © 2015, Positec. All Rights Reserved. 2PSC16APK11007A0...
Need help?
Do you have a question about the WX422 and is the answer not in the manual?
Questions and answers