Remove Departure; Remove Arrival; Remove Approach; Closest Point Of Fpl - Garmin G1000 Pilot's Manual

Remove Departure

Remove Departure deletes the current standard instru-
ment departure (SID) from the active flight plan.

Remove Arrival

Remove Arrival deletes the current standard terminal
arrival route (STAR) from the active flight plan.

Remove Approach

Remove Approach deletes the currently selected ap-
proach from the active flight plan.
To remove a departure, an arrival, or an
approach from a direct-to or active flight
plan:
From the Flight Plan window, press the MENU
1.
key to display the page menu options.
2. Turn the FMS knob to highlight 'Remove Depar-
ture', 'Remove Arrival', or 'Remove Approach',
then press the ENT key. A confirmation window
appears listing the procedure that is about to
be removed, with 'OK' highlighted. Press the
ENT key to remove the procedure.
To cancel, turn the large FMS knob to highlight
3.
'CANCEL', then press the ENT key.
190-00387-02 Rev. A
est distance at which a flight plan passes from a reference
waypoint. It may also be used to create a new user way-
point along the flight plan at the location closest to a cho-
sen reference waypoint.
Garmin G1000 PFD Pilot's Guide for Cessna Nav III
SUPPLEMENTAL FLIGHT DATA

Closest Point of FPL

Closest Point of FPL calculates the bearing and clos-
Figure 3.6.23 Closest Point of FPL Window
To determine the closest point along the
active flight plan to a selected waypoint:
From the Flight Plan window, press the MENU
1.
key to display the page menu options.
Turn the FMS knob to highlight 'Closest Point
2.
of FPL', then press the ENT key. A window
appears with the reference waypoint field
highlighted.
Turn the FMS knobs to enter the identifier of the
3.
reference waypoint, then press the ENT key. The
G1000 displays the bearing (BRG) and distance
(DIS) to the closest point along the flight plan
from the selected reference waypoint.
4. To create a user waypoint at this location and
add it to the flight plan, press the ENT key. The
name for the new user waypoint is derived from
the identifier or the reference waypoint.
3-41