Load Departure; To Select A Departure For The Departure Airport - Garmin G1000 Pilot's Manual

Load Departure

Load departure allows the pilot to select a published
standard instrument departure (SID) for the departure
airport, or replace the current departure with a new selec-
tion. When using a direct-to, the G1000 uses the nearest
airport as a reference when displaying available depar-
tures.
NOTE The PROC key can also be used to load a
:
departure, an approach, or an arrival.
To select a departure for the departure
airport:
From the Flight Plan window , press the MENU
1.
key to display the page menu options.
2. Turn the FMS knob to highlight 'Load Depar-
ture', then press the ENT key. A window
appears listing the available departures for the
departure airport.
3. Turn the FMS knob to select the desired depar-
ture, then press the ENT key.
NOTE: This runway window is not displayed for
every departure. 'ALL' may appear in the runway
field, indicating that the departure procedure
applies to all runways. For airports with parallel
runways,'B' may appear at the end of the runway
designation to indicate that the departure proce-
dure applies to both runways.
4. A window may appear listing runways for the
departure. Turn the FMS knob to select the
desired runway, then press the ENT key. The
transition window is now displayed.
5. Turn the FMS knob to select the desired transi-
tion waypoint, then press the ENT key. With
'LOAD?' highlighted, press the ENT key.
190-00387-02 Rev. A Garmin G1000 PFD Pilot's Guide for Cessna Nav III
SUPPLEMENTAL FLIGHT DATA
Figure 3.6.19 Departure
Figure 3.6.20 Departure Runway
Figure 3.6.21 Departure Transition
Figure 3.6.22 Select Departure Window
3-39