Commissioning; Unpacking; Returns And Exchanges; Transmitter Documentation - Harris ZX2500 Technical Manual

Section 2 Installation
2.1.2

Commissioning

If the transmitter is installed by station staff or representatives, you may still have a
Harris service engineer perform an operational check-out and/or proof of performance
of the transmitter. If you require a special test protocol beyond the tests recorded in the
factory test data report, please notify Harris at your earliest convenience.
2.2

Unpacking

Upon receipt of the transmitter shipment, carefully unpack the transmitter and perform
a visual inspection to ensure that no apparent damage was incurred during shipment.
Retain the shipping materials until it has been determined that the unit is not damaged.
The contents of the shipment should be as indicated on the packing list. If the contents
are incomplete or if the unit is damaged electrically or mechanically, notify the carrier
and Harris Corporation, Broadcast Division.
NOTE:
Locate and retain the technical manual, drawing package, and factory test data.
The factory test data contains information that is vital to installation and opera-
tion of the transmitter.
2.3

Returns and Exchanges

Damaged or undamaged equipment should not be returned unless written approval and
a Return Authorization is received from Harris Corporation, Broadcast Division.
Special shipping instructions and coding will be provided to assure proper handling.
Complete details regarding circumstances and reasons for return are to be included in
the request for return. Custom equipment or special order equipment is not returnable.
In those instances where return or exchange of equipment is at the request of the
customer, or convenience of the customer, a restocking fee will be charged. All returns
will be sent freight prepaid and properly insured by the customer. When
communicating with Harris Corporation, Broadcast Division, specify the Harris Order
Number or Invoice Number.
2.4

Transmitter Documentation

Prior to installation, this technical manual, the factory test data, and the accompanying
drawing package should be studied carefully to obtain a thorough understanding of the
principles of operation, circuits, and nomenclature used in the ZX series transmitter.
2-2
WARNING: Disconnect primary power prior to servicing.
888-2595-001
ZX Series
12/20/11