Customer Set Relocation - Samsung iDCS100 System Administration Manual

Digital communication system
Hide thumbs Also See for iDCS100:
Table of Contents

Advertisement

Samsung iDCS100

CUSTOMER SET RELOCATION

[MMC 315]
This program is used to exchange information associated with two stations or add-on
modules (AOMs). All individual station assignments such as trunk ring, station group,
station COS, station speed dial and key assignments are swapped. A user can then
relocate to the new station and operate it exactly like their original station. The stations
being exchanged must be idle for this program to work, and programming done from a
different keyset.
There are two important rules to follow:
You cannot exchange DCS (Euro) keysets with iDCS series keysets.
Generally, you can only exchange keysets or AOMs of the same type (e.g. 6B with
6B, 48B with 48B)
However, there are exceptions to the last rule:
You can exchange a Euro 12B for a Euro 24B keyset, and vice versa.
You can exchange an iDCS 18D for an iDCS 28D keyset, and vice versa.
You can exchange a DCS 48B AOM for an iDCS 64B AOM, and vice versa.
Refer to the table, below, to determine which devices can be exchanged. Attempting to
exchange incompatible devices will result in an error message display ("INVALID
DATA").
1
If you are exchanging a Euro 12B and 24B
sume the key assignments for the first 12 keys on the 24B keyset. Conversely, the first 12 keys
on the 24B keyset will assume the key assignments for the 12B keyset.
2
If you are exchanging an iDCS 28D and 18D keyset,
10 programmable keys are numbered 01–10 and the last eight keys are numbered 21–28 (not
11–18). When you exchange 18D and 28D keysets you copy keys 01–10 to keys 01–10 and
keys 21–28 to keys 21–28. Keys 11-20 on 28D keysets will not be copied.
3
If you are exchanging a 48B AOM and a 64B
signments for the first 48 keys on the 64B AOM. Conversely, the first 48 keys on the 64B AOM
will assume the key assignments for the 48B AOM. You must first remove any association
with master stations, using MMC 209, otherwise an error message will be displayed
("ERROR:AOM MASTER").
34
System Administration Guide
keyset, be aware that the 12B keyset will as-
remember that for 18D keysets the first
AOM, the 48D keyset will assume the key as-
1
2
3

Advertisement

Table of Contents
loading

Table of Contents