Table of Contents
Advertisement
Samsung iDCS100
CREATE PROGRAMMED STATION
MESSAGES
[MMC 715]
Programmed messages can be selected by a station user to inform other users of their
current status (e.g. "In a Meeting"). The message displays on the user's keyset and
also on any calling keyset which has a display. You can edit existing (default) mes-
sages if necessary, and set up new ones to suit your working environment.
There are 20 possible messages (01–20). Messages 01–10 are pre-programmed as
follows, but can be changed:
01 GIVE ME THE CALL
02 TAKE A MESSAGE
03 ASK THEM TO HOLD
04 SEND TO MY VOICE MAIL
05 TRSF TO MY SECY
06 LEAVE A MESSAGE
07 PAGE ME
08 OUT OF TOWN
09 IN A MEETING
10 I WILL CALL BACK
Messages 11–18 are blank for new messages to be created (up to 16 characters).
Messages 19–20 are pre-programmed as follows, but can be changed:
19 RETURN AT
20 RETURN ON
(Station users can select these messages and insert times or dates as required into the
message—e.g. "RETURN AT 1230".)
After programming these messages, inform station users what they are.
Open customer programming and follow these instructions.
ACTION
1. Press Transfer (or TRSF) 715
Display shows
2. Dial the message number (e.g., 11)
OR press the VOLUME keys to make the
selection and press the right soft key to
move the cursor
3. Enter the message using the procedure described
in
Program Station Names
soft key to return to step 2 above
4. Press Transfer (or TRSF) to store and exit
programming OR press SPEAKER to store and
advance to the next program
24
and press the right
System Administration Guide
DISPLAY
PGM.MESSAGE (01)
GIVE ME THE CALL
PGM.MESSAGE (11)
_
PGM.MESSAGE (11)
IN THE SHOWROOM
Advertisement
Table of Contents
