Left Cover; Removing The Left Cover - Canon i-SENSYS MF4300dn Service Manual

9.3.4 Left Cover

9.3.4.1 Removing the Left Cover

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn
1) Remove the front over.(page 9-2)Reference[Removing the Front Cover]
2) Close the printer cover [1].
3) Disengage the claw to remove the holder [2].
[2]
4) Remove from the damper rail while picking the damper [1]
[1]
5) Remove the 4 screws [2] to remove the damper [1].
[2]
[2]
[1]
F-9-8
F-9-9
[1]
F-9-10
The scanner unit cannot be secured if the damper is removed. Be careful not
0020-2728
to get your hands caught because you have to perform the work with the
control panel open from now onward.
6) Remove the damper stopper [3].
- 1 screw [1]
- 1 claw [2]
[1]
[2]
7) Remove the damper rail [3].
-2 screws [1]
-1 claw [2]
[3]
[2]
8) Open the printer cover [1].
9) Remove the 5 claws [2] to detach the left cover [3].
[3]
F-9-11
[1]
[1]
F-9-12
Chapter 9
9-3