Table of Contents
Advertisement
HP
27130B
EQUIPMENT SUPPLIED
The standard
HP
27130B Eight-Channel Multiplexer consists of the following items:
Printed Circuit Card, Part Number 5061-4929
Seventy centinleter (27.5 inch) RS-232-C Panel Cable, Part Number 28658-63001
RS-232-C Panel (connection box), Part Number 28658-60005
Extension Cable Kit, Part Number 1252-0508
EPROMs, Part Numbers 27130-80005 and 27130-80006
Installation Manual, Part Number 27130-90003
PANEL BRACKET OPTIONS AVAILABLE
The following optional RS-232-C panel mounting brackets are available with the
HP
27130B.
Option 019:
Mounting Bracket, Part Number 5001-5278 (Used with for mounting RS-232-C panel in
HP
19-inch rack cabinets.) NOTE: Bracket has two-panel capacity.
Option 540:
Mounting Bracket, Part Number 5001-5279 (Used for mounting RS-232-C panel on
HP
9030A
and 9040A computers.)
Option 550:
Mounting Bracket, Part Number 5001-5280 (Used with
HP
9000 computer, series 500, model
9050A racked in the 92211R cabinet.)
PRODUCT AND PART
IDENT~FICATION
The Product
Up to five digits and a letter (27130B in this case) are used to identify Hewlett-Packard products.
The five digits identify the product; the letter indicates the revision level of the product.
Printed Circuit Card
The printed circuit card supplied with the
HP
27130B product is identified by a part number marked
on the card. In addition to the part number, the card is further identified by a letter and a four-digit
1-3
Advertisement
Table of Contents
