Dialup Connection; Two-Wire Leased Line Connection; Four-Wire Leased Line Connection; Phone Connection - Multitech MT5600BA Quick Start Manual

Data/fax modem

Hide thumbs Also See for MT5600BA:

Table of Contents

MultiModemII Quick Start Guide

Dialup Connection

Plug one end of the modular phone cable into the modem's

LINE jack, and the other end into a public switched telephone

network (PSTN) wall jack.

Note: The LINE jack is not interchangeable with the PHONE

jack. Do not plug the phone into the LINE jack or the line cable

into the PHONE jack.

Note: Regulatory agencies may impose certain restrictions on

equipment connected to public telephone systems. For more

information, see Appendix A of the User Guide.

MT5600BA Plug one end of a two-wire phone cable into the

modem's LINE jack, and connect the other end to a leased line

wall jack or terminals.

MT5600BL Plug one end of a two-wire phone cable into the

modem's LEASED jack, and connect the other end to a leased

line wall jack or terminals.

On an MT5600BL only, plug one end of a four-wire phone ca-

ble into the modem's LEASED jack, and connect the other end

to a four-wire leased line wall jack or terminals. For dial back-

up operation, plug one end of the modular phone cable into the

modem's LINE jack, and the other end into a PSTN wall jack.

For voice-only calls, plug a telephone into the modem's

PHONE jack (optional).

Table of Contents

Mt5600bl