Titan SPEEFLO Commander 741-440 Owner's Manual page 33

commander™ 920 Outlet Manifold Filter assembly Service Instructions
cleaning
Clean filter regularly. Dirty or clogged filters can greatly reduce
filtering ability and cause a number of system problems including
poor spray patterns, clogged spray tips, etc.
To clean the filter, shutoff system and relieve all system pressure.
See the Pressure Relief Procedure on page 7.
1. Remove filter cap (1).
2. Pull filter element with check ball (3) straight out of the
filter body (6).
3. Thoroughly clean inside filter body (6), filter element with
check ball (3) and filter cap (1) with appropriate solvent.
Use care in handling parts as dirt, debris, scratches or
nicks may prevent O-rings or gaskets from sealing.
The 920 Series Filter Elements filter from the inside out. Be
certain to clean the screen element thoroughly on the inside.
Soak in solvent to loosen hardened paint, etc. or replace.
Part No. 920-050 Filter Service Kit
ITEM PaRT
DEScRIPTION
NO. NO.
2 920-103 Ball
4 920-006 Gasket, Teflon
5 920-070 Gasket, Teflon
Specifications
Max. Working Pressure
Filter Area
Outlet Ports
Wetted parts
© Titan Tool Inc. All rights reserved.
QTy.
1
1
1
5000 psi 6000 psi
(345 bar) (413 bar)
18in (116 cm )
2 2
(1) 1/4" NPT (F) for
bleed valve
(1) 3/8" NPT (F) with
1/4 NPSM (M) hose
connection
(1) 3/8" NPT (F) plug for
additional gun hookup.
Carbon steel with
electroless nickel
and cadmium plating,
stainless steel, Teflon
33