Titan 700-3030 Owner's Manual
  1. Manuals
  2. Brands
  3. Titan Manuals
  4. Paint Sprayer
  5. 700-3030
  6. Owner's manual
Titan 700-3030 Owner's Manual

Titan 700-3030 Owner's Manual

Airless sprayer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Do not use this equipment before reading this manual!
NOTE: This manual contains
important warnings
and instructions.
Please read and retain
for reference.
Model Numbers:
Skid Basic
Skid Loaded
High Rider Basic
High Rider Loaded
Printed in the U. S. A.
440
Airless Sprayer
700-3030
700-3035
700-3040
700-3045
Owner's Manual
For professional use only
ix
X-Lock Theft Deterrent System
Security Code
— — — —
_ _ _ _ _ _ _ _ _ _
Serial #
0707 © 2006 Titan Tool Inc. All rights reserved. Form No. 313-2459C

Advertisement

Table of Contents
loading

Related Manuals for Titan 700-3030

Summary of Contents for Titan 700-3030

  • Page 1 — — — — High Rider Basic 700-3040 High Rider Loaded 700-3045 _ _ _ _ _ _ _ _ _ _ Serial # 0707 © 2006 Titan Tool Inc. All rights reserved. Form No. 313-2459C Printed in the U. S. A.

  • Page 2: Safety Precautions

    Consultation with a plastic surgeon or • Use lowest possible pressure to flush equipment. reconstructive hand surgeon may be advisable. • Do not spray onto pump assembly. © Titan Tool Inc. All rights reserved.

  • Page 3: Specifications

    IMPORTANT: When the sprayer is used with a generator away from the equipment at all times. or uncontrolled line voltage, the use of Titan’s “Line Surge Protector” (P/N 800-935) is recommended. • Do not overreach or stand on an unstable support. Keep effective footing and balance at all times.

  • Page 4: Table Of Contents

    Safety Precautions section at the front of this manual before operating this 7. Turn off the sprayer by moving the ON/OFF switch to the equipment. OFF position. © Titan Tool Inc. All rights reserved.

  • Page 5: Preparing To Paint

    Motor Running including servicing or adjusting any part of the Indicator spray system, changing or cleaning spray tips, or Motor Running Max PSI (Bar) preparing for cleanup. © Titan Tool Inc. All rights reserved.

  • Page 6: Xact Digital Control System Operation

    – MENU SELECT JOB GALLONS XXXX Function To select the Job Volume Keys MENU-1 RESET-3 screen, press the #4 key. Unit Serial # Screen © Titan Tool Inc. All rights reserved.

  • Page 7: Pressure Relief Procedure

    If the wrong code is entered, the display will continue to ask for the correct code and the security code cannot be changed. © Titan Tool Inc. All rights reserved.

  • Page 8: Spraying

    Shrubs next to houses should be tied back and covered with a canvas cloth. The cloth should be removed as soon as possible. Titan gun extensions are extremely helpful in these situations. Nearby objects such as automobiles, outdoor furniture, etc.

  • Page 9: Cleanup

    7. Turn on the sprayer by moving the Max PSI (Bar) 4. If you have any further questions concerning your TITAN ON/OFF switch to the ON position. Airless Sprayer, call TITAN: 8. Allow the solvent to circulate through the unit and flush the paint out of the return hose into the metal waste container.

  • Page 10: Replacing The Motor

    Panel Screw Control Panel Motor Armature Gear Motor Mounting Gear and Crank Screw Assembly Thrust Washer Pump Housing 2nd Stage Gear Front Cover Pump Housing Front Cover Screw Front Cover Front Cover Screw © Titan Tool Inc. All rights reserved.

  • Page 11: Replacing The Transducer

    (refer to the electrical schematic in the Parts List section Groove Pin of this manual). 12. Reassemble the pump by reversing steps 1–7. Pump Front Housing Cover T-Slot Front Cover Pump Screw Transducer Block Assembly Pump Block Mounting Screw © Titan Tool Inc. All rights reserved.

  • Page 12: Servicing The Fluid Section

    NOTE: Coat the piston guide tool and the piston rod 6. Reassemble the valves by reversing the steps above. with grease before inserting them into the pump block. 13. Using a wrench, tighten the retainer nut securely. © Titan Tool Inc. All rights reserved.

  • Page 13: Replacing The Filters

    4. Turning counterclockwise, thread the new or cleaned filter into the pump block. 5. Slide the filter housing over the filter and thread it into the pump block until secure. Filter Housing Filter Seal Pump Block © Titan Tool Inc. All rights reserved.

  • Page 14: Troubleshooting

    4. Faulty or loose wiring. 4. Inspect or take to a Titan authorized service center. 5. Excessive motor temperature. 5. Allow motor to cool.

  • Page 15: Xact Digital Control System Error Messages

    Xact Digital sprayer. Once a problem occurs and the error message Control System has risen too high. Take the sprayer to a Titan appears, the sprayer will shut down. authorized service center for repair.
  • Page 16 • Se servir de la pression la plus basse possible pour vidanger s’avérer nécessaire de consulter un plasticien ou un spécialiste l’appareil. en chirurgie reconstructive de la main. • Ne pas pulvériser de produit sur la pompe. © Titan Tool Inc. Tous droits réservés. Français...
  • Page 17 électrique de la prise avant de travailler sur l’équipement. • N’utilisez pas le tuyau pour tirer ou soulever l’équipement. • Ne pas soulever par la poignée de chariot en chargeant ou en déchargeant. © Titan Tool Inc. Tous droits réservés. Français...
  • Page 18 Puede ser • No rocíe el ensamblaje de la bomba. aconsejable consultar con un cirujano plástico o un cirujano especialista en reconstrucción de las manos. © Titan Tool Inc. Todos los derechos reservados. Español...
  • Page 19 • No utilice la manguera como elemento de fuerza para tirar del equipo o levantarlo. • No levantar por la manija del carro al cargar o descargando. © Titan Tool Inc. Todos los derechos reservados. Español...

  • Page 20: Parts Listings

    Parts List Main Assembly High Rider Model © Titan Tool Inc. All rights reserved.

  • Page 21: Skid Assembly

    704-109 O-ring (for hot solvents, optional) 700-1024 Elbow ............1 704-179 Leg, left, complete 704-127 Retaining clip ..........1 (includes items 1–4) 704-391 Return hose clip (not shown)......1 704-178 Leg, right, complete (includes items 5–10) © Titan Tool Inc. All rights reserved.

  • Page 22: Fluid Section Assembly

    NOTE: When using “hot” solvents, replace Viton valve stem o-ring (item 27) with optional PTFE valve stem o-ring (P/N 700-897). Install using o-ring replacement tool (P/N 700-890). © Titan Tool Inc. All rights reserved.

  • Page 23: Drive Assembly

    Transducer o-ring ........1 mounting screw (not shown).......4 704-588 Electronic pressure control (EPC) ....1 704-126 Electronic pressure control 704-589 Motor (without EPC) ........1 lock washer (not shown)......4 704-173 Crankshaft/gear assembly ......1 704-174 Thrust washer ..........1 © Titan Tool Inc. All rights reserved.

  • Page 24: High Rider Cart Assembly

    WHITE Motor GREEN AC-Motor AC-Motor BLACK BLACK Ground Surge AC-Line AC-Neut Suppressor Control Panel Electronic Pressure Board Control (EPC) WHITE WHITE NOTE: All electrical work should be performed by an authorized service center. © Titan Tool Inc. All rights reserved.

  • Page 25: Accessories

    S-3 Stainless Steel Airless Gun • 3900 PSI • Stainless Steel fluid passages • High Pressure Swivel • In-handle filter • 4-finger trigger pull Part No. Description 550-250 ...S-3 — 4 Finger Gun © Titan Tool Inc. All rights reserved.
  • Page 26 Notes © Titan Tool Inc. All rights reserved.
  • Page 27 Notes © Titan Tool Inc. All rights reserved.

  • Page 28: Warranty

    Warranty Titan Tool, Inc., (“Titan”) warrants that at the time of delivery to the original purchaser for use (“End User”), the equipment covered by this warranty is free from defects in material and workmanship. With the exception of any special, limited, or extended warranty published by Titan, Titan’s obligation under this warranty is limited to replacing or repairing without charge...

This manual is also suitable for:

440ix700-3035700-3040700-3045

Table of Contents