Table of Contents
Advertisement
SETTING UP AND OPERATING THE SPEED CONTROL UNIT
Insert a flat-head
screwdriver or coin, into
the gap at the side of the
battery cover and carefully
prise it open.
Battery
cover
Insert four D cell batteries
in the order shown in the
diagram.
Follow the polarity
instructions inside the
battery compartment to
ensure that the batteries
are installed correctly.
Refit the battery cover.
Note: Batteries are not
supplied with this product.
Speed dial
Speed switch
Using the Speed Control
Unit
Use the speed switch to
select the appropriate
setting for the seat height
you are using, Newborn or
Infant, see page 11.
To adjust the speed, rotate
the speed dial to the
desired speed.
Note: It may take up to 30
seconds to reach full swing
speed. Push the seat
gently to start swing
moving.
– 10 –
Advertisement
Table of Contents
