Mamas & Papas GO1M-R1 perfect height swing Instructions For Use Manual page 4

Select front leg A, which
has an A printed on the top
of the leg, and connect it to
rear leg A which has an A
stamped on the frame
bracket at the top of leg.
Note: Rear leg A has the
speed control unit at the
top.
Pinch the two spring-loaded
buttons at the top of front
leg A and slide the top of
the leg into the frame
bracket at the top of rear
leg A. With the top of front
leg A inside the frame
bracket, depress the third
spring-loaded button on the
leg and fully insert front leg
A into the frame bracket.
Ensure that the top two
buttons snap into position
through the holes in the
frame bracket.
Rotate front leg A until the
third spring-loaded button
locks into position though
the hole in the frame
bracket.
Repeat these steps to
connect front leg B to rear
leg B.
ASSEMBLING THE SWING FRAME
control
Front
leg A
Speed
unit
– 4 –
Frame
bracket
Rear leg A