Mamas & Papas GO1M-R1 perfect height swing Instructions For Use Manual page 5

Select the rear feet and
position them so that the
plastic feet are flat on the
floor and the leg ends point
upwards at an angle.
Slot the rear legs onto the
top of the rear feet
ensuring that the seat
connectors face into the
swing. Depress the spring-
loaded buttons on the top
of the rear feet and slot the
components together.
After attaching the rear
legs to the rear feet, select
the front feet and position
them so that the plastic
feet are flat on the floor
and the leg ends point
upwards at an angle.
Slot the front legs onto the
top of the front feet.
Depress the spring-loaded
buttons on the top of the
front feet and slot the
components together.
Ensure that the buttons
snap into position.
Ensure that the seat
connectors face into the
swing when assembling the
frame of the swing, see
diagram.
ASSEMBLING THE SWING FRAME
Rear feet
Rear
leg A
Seat
connectors
– 5 –
Front
feet