Advertisement
2.4 On the Local Area Connection Status window click on
Properties.
2.5 (a) On the Local Area Connection Properties window click on
Internet Protocol (TCP/IP).
(b) Click Properties.
2.6 (a) On the Internet Protocol (TCP/IP) Properties window click
on Obtain an IP address automatically.
(b) On the Internet Protocol (TCP/IP) Properties window click
on Obtain DNS Service addresses automatically.
(c) Click OK to save the settings.
3. 0 Setup Wireless
After you have install your wireless network adapter, you need to run
Wireless Network Installation Wizard (Control Panel - Network
Connection). Please refer to manufacture regarding Installation.
3.1 Choose Setup My Wireless Connection.
Page 2 of 6
Advertisement
