ZyXEL Communications 2602HWL Setup Manual page 5

3.13 You will not be able to access confi guration page until you
refresh your wireless network and connect again.
4. 0 Test VoIP Account
Please check the call rates displayed on TPG website (http://
www.tpg.com.au/voip/callrates.php ) before dialling.
4.1 To call a destination listed in TPG Metro Calling Zone or TPG
Regional Calling Zone:
Dial the 2-digit area code (02,03,07,08) and then the 8-digit local
phone number. Please note even if you are calling a local number,
area code is still required.
For example: to call telephone number 9999 9999 in Sydney, dial 02
9999 9999
4.2 To call a destination outside of TPG Metro Calling Zone or
TPG Regional Calling Zone:
Dial 001161, 1-digit area code (2,3,7,8) and then the 8-digit local
phone number.
For example: to call telephone number 9999 9999 in Armidale, dial
001161 2 9999 9999.
Please always delete the leading "0" from the area code when calling
this way.
4.3 To call a mobile phone within Australia:
Dial the 10-digit mobile phone number directly.
For example: to call mobile number 0422 999 999 in Australia, dial
0422 999 999.
4.4 To call an internatal destination:
Dial 0011, the country code, the area code and then the local phone
number.
For example: to call telephone number 9999 9999 in London, dial
0011 4420 9999 9999.
LifeLine Options
Lifeline allows you to use VoIP phone service and PSTN phone ser-
vice through the ZyXEL 2602HWL.
- You can receive incoming PSTN phone calls.
- You can make outgoing PSTN phone calls by dialing a prefi x * then
wait 5 seconds, the phone will then switch from VoIP to PSTN.
- You can still make PSTN phone calls if the ZyXEL 2602HWL loses
power.
5. 0 Change ADSL Password
5.1 For security purposes we highly recommend you to change
your password. Go to the following link to change your
password:
https://cyberstore.tpg.com.au/your_account/changepass.html
Activation of your new password will take approx.15 minutes.
NOTE: we will now be logging into ZyXEL router.
5.2 Browse to 192.168.1.1.
5.3 Enter "admin" into the password fi eld. (TPG ZyXEL default
password "admin").
5.4 Click on Login.
5.5 Click on WAN, underneath the Advanced Setup menu.
5.6 Click on WAN Setup, underneath the WAN Functions heading.
Page 5 of 6