Wizard Setup: Wireless Lan; Table 4 Wizard: General Setup - ZyXEL Communications ZyAIR G-5100 User Manual

ZyAIR G-5100 User's Guide

Table 4 Wizard: General Setup

LABEL
System Name
Domain Name
Next

3.3 Wizard Setup: Wireless LAN

Use this wizard screen to configure one of the ZyAIR's two wireless LAN (WLAN) adapters
to function as an AP (WLAN 1 is recommended). Use the ADVANCED WIRELESS screens
to configure a WLAN adapter for bridge/repeater functions.
Note: The wireless clients and ZyAIR must use the same SSID, channel ID and WEP
encryption key (if you enable WEP) for wireless communication.
44
DESCRIPTION
It is recommended you type your computer's "Computer name".
In Windows 95/98 click Start, Settings, Control Panel, Network. Click the
Identification tab, note the entry for the Computer Name field and enter it as the
System Name.
In Windows 2000, click Start, Settings, Control Panel and then double-click
System. Click the Network Identification tab and then the Properties button.
Note the entry for the Computer name field and enter it as the System Name.
In Windows XP, click Start, My Computer, View system information and then
click the Computer Name tab. Note the entry in the Full computer name field
and enter it as the ZyAIR System Name.
This name can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes "-" and underscores "_" are accepted.
This is not a required field. Leave this field blank or enter the domain name here
if you know it.
Click Next to proceed to the next screen.
Chapter 3 Wizard Setup