Electric Power System
Charging Instructions
Charging instructions for the Kenworth Clean Power System is as follows:
Charging Terminals
Starter Batteries
Kenworth
ElECTrIC POWEr SySTEM
Main Batteries
Y53-1024 12/06
WARNING! Do not attempt to jumpstart the ve-
hicle. The electrical charging system used for the
Kenworth Clean Power System is different than
normal charging systems. Failure to adhere to
the proper charging procedure could lead to seri-
ous injury or vehicle damage. Refer to the charg-
ing instructions located on the top of the main
battery box cover or in the Kenworth Clean Power
operator's manual supplement/service manual.
Do not attempt to jumpstart the vehicle. If you have a battery problem, it is
best to contact an authorized Kenworth repair facility or a reputable towing
service. When you do, inform them of the charging instructions and the
wiring schematic on page 10.
Vehicles equipped with the Kenworth Clean Power System have battery
configurations that are different than traditional vehicles. These vehicles
have two different sets of batteries; the Main Batteries and the Starter Bat-
teries.
- -