Cooling Vents - Kenworth Y53-1024 Operator's Manual

Heating and Air Conditioning System

Cooling Vents

Kenworth
Return Vents
Output Vents
Y53-1024 12/06
Up to four cooling vents are located in the sleeper compartment (depend-
ing on the sleeper configuration). One or two output vents is/are located
on the driver's side of the compartment. One or two return vents is/are
located on the passenger side compartment.
NOTE: Do not close or otherwise obstruct the return
vent(s). Doing so will not allow the system to function
normally.
This system is completely separate of the Fuel-Fired Heater and the cab
air conditioning system. Cooling vents are used only to cool and ventilate
the cab sleeper.
- 33 -