Charge Enable Switch - Kenworth Y53-1024 Operator's Manual

Kenworth clean power system
Table of Contents

Advertisement

Heating and Air Conditioning System

Charge Enable Switch

Charge Enable Switch
Kenworth
The Charge Enable Switch is located on the cab dash and enables the Air
Conditioning Charge Unit to cool the Storage Cooler. The switch should
normally be left in the CHARGE position (top of switch is pressed). Switch-
ing to the OFF position (bottom of switch is pressed) will disable the Air
Conditioning Charge Unit. When the Air Conditioning Charge Unit is on, a
green lamp will be displayed on the Charge Enable Switch. When the Green
lamp turns off, the charging cycle is complete.
NOTE: The Green lamp can cycle on and off as the
system maintains the cooling capacity.
NOTE: The Charge Enable Switch does not turn on
the Sleeper Air Conditioning System. It only enables
the Air Conditioning Charge Unit to cool the Storage
Cooler.
Y53-1024 12/06
- 3 -

Advertisement

Table of Contents
loading

Table of Contents